[ LUGOS ] Adaptec AIC-7896 SCSI timeouts

[Ales Bardorfer]

Imam probleme s SCSI host adapterjem pri instalaciji RH 6.1. 
Po boot-u RH zazna SCSI adapter iz subjecta (aic7xxx), toda ko nalaga
modul dobim nasldnje, ne glede kaksne parametre podam modulu
(aic7xxx=no_reset ali pa aic7xxx=no_probe):

SCSI `Zazna Adaptec AIC-7896`...

SCSI aborting command due to timeout: pid 1, scsi0, channel 0, id 1, lun
0
Test Unit 00 00 00 00 00
SCSI host 0 abort (pid 1) timed out - reseting 
SCSI bus is being reset for host 0 channel 0
SCSI host 0 channel 0 reset (pid 1) timed out - trying harder
SCSI bus is being reset for host 0 channel 0
SCSI host 0 abort (pid 1) timed out - reseting 
SCSI bus is being reset for host 0 channel 0
SCSI host 0 channel 0 reset (pid 1) timed out - trying harder

... v nedogled

Osnovna plosca: Intel L440GX+ Server board
SCSI: Adaptec AIC-7896 Bios v2.20S1B1
      BIOS enabled
      Host adapter ID: 7
      Kanal A:
        IBM 17GB disk, ID 1
        IBM 17GB disk, ID 2
      Kanal B:
        HP tape, ID 3

	
Zanimivo je to, da RH 5.2 (z 2.0 jedrom!) namestim brez problema in
seveda tudi SCSI krmilnik je prepoznan.
Mislim ,da tu ni problematicna distribucija, ker module naj bi imele vse
variante linuxa enake, ne?

Kje ga lomim, oziroma kako naj se sploh lotim zadeve? Ali mora biti ID
enega diska nujno 0?

Hvala za odgovore in lp,
Ales