[ LUGOS ] Teles 16.3c PnP ISDN

[Tadej Slemc]

Hail 

 
Glede type=14 ...
  14   Teles 16.3c PnP          irq, io         

type4= je pa za telec 16.3 pnp ... brez Cja :)

On Wed, Nov 03, 1999 at 02:05:14PM +0100, Bostjan Mercun wrote:
> > (INT 0 (IRQ 3 (MODE +E)))
> > (IO 0 (SIZE 2) (BASE 0x0100))
> > (NAME "TAG2620/1344480022[0]{TELES.S0/16.3c Plug&Play}")
> > (ACT Y)
> 
> > ...
> > 
> > potem napisem pa isapnpn /etc/isapnp.conf  ... in pa se :
> > 
> > modprobe hisax type=14 protocol=2 io=0x100 irq=3 id=teles
> 
> Kje si dobil "type=14"? Poizkusi se s "type=4".
> 
> Izrezek iz /usr/src/linux/Documentation/isdn/README.HiSax:
> 
> 5. Teles 16.3 PnP, Euro ISDN, with isapnp configured 
>    isapnp config:  (INT 0 (IRQ 10 (MODE +E)))
>                    (IO 0 (BASE 0x0580))
>                    (IO 1 (BASE 0x0180))
>   modprobe hisax type=4 protocol=2 irq=10 io0=0x580 io1=0x180
> -----
> 
> Pa se tole iz istega file-a:
> 
>  Card types:
>        
>   type  
>     1   Teles 16.0              pa=irq  pb=membase      pc=iobase
>     2   Teles  8.0              pa=irq  pb=membase
>     3   Teles 16.3              pa=irq  pb=iobase
>     4   Creatix/Teles PNP       ONLY WORKS AS A MODULE !
>     5   AVM A1 (Fritz)          pa=irq  pb=iobase
>     6   ELSA PCC/PCF cards      pa=iobase or nothing for autodetect
>     7   ELSA Quickstep 1000     ONLY WORKS AS A MODULE !
>     7   ELSA PCMCIA             irq, io  (set with card manager)
>     8   Teles S0 PCMCIA         pa=irq  pb=iobase
>     9   ITK ix1-micro Rev.2     pa=irq  pb=iobase
> -----
> 
> > 
> > slednji pa mi na stdin izpise:
> > 
> > ISDN subsystem Rev: 1.83/1.68/1.88/1.49/none/1.2 loaded
> > Teles 16.3c: IRQ(3) getting no interrupts during init 1
> > bug: kernel timer added twice at c484e764.
> > Teles 16.3c: IRQ(3) getting no interrupts during init 2
> > bug: kernel timer added twice at c484e764.
> > Teles 16.3c: IRQ(3) getting no interrupts during init 3
> 
> ###########################################
> #> HiSax: Card Teles 16.3c not installed !#
> ###########################################
> 
> Iz tega sklepam, da modul kartice ne zazna.
> 
> > /lib/modules/2.2.11/misc/hisax.o: init_module: Device or resource busy
> > ISDN-subsystem unloaded
> 
> Te napake je meni tudi redno pisal, torej "getting no interrupts during
> init ?", ampak mi je prisel do 2, potem se je pa pobral. Tukaj mi na
> pamet padeta dva problema. Ali modul kartice ne zazna, ker je narobe
> skonfigurirana, kar pomeni, da je problem verjetno v isapnp, ali imas pa
> prestar isdn4linux in s tem tudi HiSax modul. Jaz vem, da sem moral za
> kernel 2.0.36 pobrat takrat najnovejsi isdn4linux beta2 ali nekaj
> takega. Poglej na www.isdn4linux.de, ce imas pravo verzijo modula.
> Mogoce se ena cudna ideja... a je s kartico vse v redu?
>  
> Ta kartica drugace nima jumperjev, ne?
> 
> lp
> 
> 		Bostjan