[ LUGOS ] Teles 16.3c PnP ISDN

[Bostjan Mercun]

> (INT 0 (IRQ 3 (MODE +E)))
> (IO 0 (SIZE 2) (BASE 0x0100))
> (NAME "TAG2620/1344480022[0]{TELES.S0/16.3c Plug&Play}")
> (ACT Y)

> ...
> 
> potem napisem pa isapnpn /etc/isapnp.conf  ... in pa se :
> 
> modprobe hisax type=14 protocol=2 io=0x100 irq=3 id=teles

Kje si dobil "type=14"? Poizkusi se s "type=4".

Izrezek iz /usr/src/linux/Documentation/isdn/README.HiSax:

5. Teles 16.3 PnP, Euro ISDN, with isapnp configured 
   isapnp config:  (INT 0 (IRQ 10 (MODE +E)))
                   (IO 0 (BASE 0x0580))
                   (IO 1 (BASE 0x0180))
  modprobe hisax type=4 protocol=2 irq=10 io0=0x580 io1=0x180
-----

Pa se tole iz istega file-a:

 Card types:
       
  type  
    1   Teles 16.0              pa=irq  pb=membase      pc=iobase
    2   Teles  8.0              pa=irq  pb=membase
    3   Teles 16.3              pa=irq  pb=iobase
    4   Creatix/Teles PNP       ONLY WORKS AS A MODULE !
    5   AVM A1 (Fritz)          pa=irq  pb=iobase
    6   ELSA PCC/PCF cards      pa=iobase or nothing for autodetect
    7   ELSA Quickstep 1000     ONLY WORKS AS A MODULE !
    7   ELSA PCMCIA             irq, io  (set with card manager)
    8   Teles S0 PCMCIA         pa=irq  pb=iobase
    9   ITK ix1-micro Rev.2     pa=irq  pb=iobase
-----

> 
> slednji pa mi na stdin izpise:
> 
> ISDN subsystem Rev: 1.83/1.68/1.88/1.49/none/1.2 loaded
> Teles 16.3c: IRQ(3) getting no interrupts during init 1
> bug: kernel timer added twice at c484e764.
> Teles 16.3c: IRQ(3) getting no interrupts during init 2
> bug: kernel timer added twice at c484e764.
> Teles 16.3c: IRQ(3) getting no interrupts during init 3

###########################################
#> HiSax: Card Teles 16.3c not installed !#
###########################################

Iz tega sklepam, da modul kartice ne zazna.

> /lib/modules/2.2.11/misc/hisax.o: init_module: Device or resource busy
> ISDN-subsystem unloaded

Te napake je meni tudi redno pisal, torej "getting no interrupts during
init ?", ampak mi je prisel do 2, potem se je pa pobral. Tukaj mi na
pamet padeta dva problema. Ali modul kartice ne zazna, ker je narobe
skonfigurirana, kar pomeni, da je problem verjetno v isapnp, ali imas pa
prestar isdn4linux in s tem tudi HiSax modul. Jaz vem, da sem moral za
kernel 2.0.36 pobrat takrat najnovejsi isdn4linux beta2 ali nekaj
takega. Poglej na www.isdn4linux.de, ce imas pravo verzijo modula.
Mogoce se ena cudna ideja... a je s kartico vse v redu?
 
Ta kartica drugace nima jumperjev, ne?

lp

		Bostjan