[ LUGOS ] Refresh rate

[Rok Papez]

Zivjo Uros.

Prilagam ti XF86Config, ki ga jaz uporabljam.
Preberi si "man XF86Config" in nato iz mojega XF86Config-a
vzemi nastavitve za monitor (nastavitve so preracunane iz monitorju
prilozene knjigce).
Tvoja XF86Config datoteka se nahaja v /etc/X11/XF86Config.

grrr... god.. MShit Outlook Depress suxx :[.
    Sem zacetnik v linuxu (uporabljam RH 5.2) in imam vprasanje glede
osvezevanja v X-ih. Imam graficno kartico ATI Xpert na work 4 Mb in 15" monitor
Hansol Mazellan 500P. V Windih sem prikazoval grafiko v 32 (oz. 24) bitni
barvni paleti v 800x600 pri frekvenci 85 Hz. V linuxu sem poskusil nastavit
podobno, sam se mi je ustavlo pri frekvenci, ki je pod nivojem (70 Hz).
Xconfigurator ni prava resitev... je mogoce XF386config, ali kak drugacen
postopek...? Prosim, da mi poveste nacin, kako nastavit zadovoljivo
osvezevalno (okrog 90 Hz pri 800x600). Hvala za odgovor...


# File generated by XConfigurator.

# *******************no y***************************************************
# Refno yer to the XF86Config(4/5) man page for details about the no yformat of 
# this file.
# *******************************no y***************************************

# **************no y********************************************************
no y# Files section.  This allows default font and rgb paths no yto be set
# *********************************************no y*************************

Section "Files"

# The locationo yn of the RGB database.  Note, this is the name of the
# fno yile minus the extension (like ".txt" or ".db").  There isno y normally
# no need to change the default.

    RgbPath	"no y/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are no yallowed (they are concatenated together)
# By default, Reno yd Hat 6.0 and later now use a font server independent of
no y# the X server to render fonts.

    FontPath   "unix/:-1no y"

EndSection

# ****************************************no y******************************
# Server flags section.
# no y*********************************************************no y*************

Section "ServerFlags"

    # Uncomment thino ys to cause a core dump at the spot where a signal is 
   no y # received.  This may leave the console in an unusable sno ytate, but may
    # provide a better stack trace in the cno yore dump to aid in debugging
    #NoTrapSignals

    # Unno ycomment this to disable the <Crtl><Alt><BS> server abort no ysequence
    # This allows clients to receive this key evno yent.
    #DontZap

    # Uncomment this to disable the <Cno yrtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  Tno yhis allows clients to receive these key events.
    #Dontno yZoom

EndSection

# *************************************no y*********************************
# Input devices
# *****no y*********************************************************no y********

# *********************************************no y*************************
# Keyboard section
# **********no y*********************************************************no y***

Section "Keyboard"

    Protocol    "Standard"

    no y# when using XQUEUE, comment out the above line, and uncono ymment the
    # following line
    #Protocol   "Xqueue"

no y    AutoRepeat  500 5

    # Let the server do the NumLocno yk processing.  This should only be 
    # required when uno ysing pre-R6 clients
    #ServerNumLock

    # Specify whino ych keyboard LEDs can be user-controlled (eg, with xset(1)no y)
    #Xleds      1 2 3

    #To set the LeftAlt to Meta,no y RightAlt key to ModeShift, 
    #RightCtl key to Composeno y, and ScrollLock key to ModeLock:

    LeftAlt        Metno ya
    RightAlt        Meta
   ScrollLock      Compose
   no yRightCtl        Control

# To disable the XKEYBOARD extenno ysion, uncomment XkbDisable.

#    XkbDisable

# To customno yise the XKB settings to suit your keyboard, modify the
# no ylines below (which are the defaults).  For example, for ano y non-U.S.
# keyboard, you will probably want to use:
#   no y XkbModel    "pc102"
# If you have a US Microsoft Naturalno y keyboard, you can use:
#    XkbModel    "microsoft"
#
# no yThen to change the language, change the Layout setting.
#no y For example, a german layout can be obtained with:
#    no yXkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVarino yant  "nodeadkeys"
#
# If you'd like to switch the positiono yns of your capslock and
# control keys, use:
#    XkbOptino yons  "ctrl:swapcaps"

# These are the default XKB settingno ys for XFree86
#    XkbRules    "xfree86"
#    XkbModel   no y "pc101"
#    XkbLayout   "us"
#    XkbVariant  ""
#    Xno ykbOptions  ""

   XkbKeycodes     "xfree86"
   XkbTypes  no y      "default"
   XkbCompat       "default"
   XkbSymbolno ys      "us(pc101)"
   XkbGeometry     "pc"
   XkbRules   no y     "xfree86"
   XkbModel        "pc101"
    XkbLayout  no y     "us"
EndSection

# *********************************no y*************************************
# Pointer section
#no y ********************************************************no y**************

Section "Pointer"
    Protocol    "PS/2"
no y    Device      "/dev/mouse"

# When using XQUEUE, commenno yt out the above two lines, and uncomment
# the following no yline.

#    Protocol	"Xqueue"

# Baudrate and SampleRate no yare only for some Logitech mice

#    BaudRate	9600
#    no ySampleRate	150

# Emulate3Buttons is an option for 2-buttno yon Microsoft mice
# Emulate3Timeout is the timeout in milno yliseconds (default is 50ms)

#    Emulate3Buttons
#    Emno yulate3Timeout    50

# ChordMiddle is an option for some no y3-button Logitech mice

#    ChordMiddle

EndSection


# no y*********************************************************no y*************
# Monitor section
# ***********************no y***********************************************

# Any nuno ymber of monitor sections may be present

Section "Monitorno y"

    Identifier  "HANSOL"
    VendorName  "HANSOL"
    no yModelName   "Mazellan 501P"
    HorizSync   30-69
    Verno ytRefresh 47-150

    Mode "640x480 na 85"
        DotClock	3no y6
        HTimings	640 696 752 832
        VTimings	480 4no y81 484 509
        Flags		"-HSync" "-VSync"
    EndMode

no y    Mode "800x600 na 85"
        DotClock	56.25
        HTimno yings	800 832 896 1048
        VTimings	600 601 604 631
  no y      Flags		"+HSync" "+VSync"
    EndMode

    Mode "102no y4x768 na 85"
        DotClock	94.5 
        HTimings	1024 10no y72 1168 1376 
        VTimings	768  769  772  808
       no y Flags		"+HSync" "+VSync"
    EndMode

    Mode "1280x102no y4 na 85"
        DotClock	110.0
        HTimings	1280 1360 1no y472 1720
        VTimings	1024 1025 1030 1067
        Flano ygs		"+HSync" "+VSync"
    EndMode

EndSection


# *******no y*********************************************************no y******
# Graphics device section
# **********************no y************************************************

# Any nno yumber of graphics device sections may be present

Sectionno y "Device"
    Identifier        "ELSA"
    VendorName    no y    "ELSA"
    BoardName         "Winner 2000/office"
   no y Chipset           "Permedia 2"
    VideoRam          409no y6
EndSection

# *****************************************no y*****************************
# Screen sections
# *******no y*********************************************************no y******

# The Colour SVGA server

Section "Screen"
    Drno yiver      "accel"
    Device      "ELSA"
    Monitor     no y"HANSOL"
    Subsection "Display"
        Depth       16
no y        Modes       "1024x768 na 85"
        ViewPort    0 0no y
    EndSubsection
EndSection

5"
  ‰