XFree 3.2a

[Andrej Cedilnik]

Oglejte si naslednji izpis:
----------------------------------------------------------
[root na bigbrother x]# startx


XFree86 Version 3.2A / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: Jan 28 1997
        If the server is older than 6-12 months, or if your card is
newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.28 i586 [ELF]
Configured drivers:
  Mach64: accelerated server for ATI Mach64 graphics adaptors
(Patchlevel 0)
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) Mouse: type: MouseMan, device: /dev/mouse, baudrate: 1200
(**) Mach64: Graphics device ID: "ATI Mach64 GT (264GT), aka RAGE,
Internal RAMDAC"
(**) Mach64: Monitor ID: "My Monitor"
(--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) Mach64: PCI: Mach64 GT rev 65, Aperture @ 0xfe000000, Block I/O @
0xfc00
(--) Mach64: card type: PCI
(--) Mach64: Memory type: 5
(--) Mach64: Clock type: Internal
(--) Mach64: Maximum allowed dot-clock: 170.000 MHz
(**) Mach64: Mode "1024x768": mode clock =  85.000
(**) Mach64: Mode "1280x1024": mode clock = 110.000
(--) Mach64: Virtual resolution: 1280x1024
(**) Mach64: videoram: 8192k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 8 MB aperture @ 0xfe000000
(--) Mach64: Ramdac is Internal
(--) Mach64: Using 8 bits per RGB value
(--) Mach64: Pixmap cache: 2 256x256 slots, 8 128x128 slots, 32 64x64
slots
(--) Mach64: Font cache: 16 fonts
PEX extension module not loaded
XIE extension module not loaded
nxterm: can't resolve symbol 'XkbLookupKeySym'

waiting for X server to shut down
----------------------------------------------------------

Bodite pozorni na vrstico:

nxterm: can't resolve symbol 'XkbLookupKeySym'

Vse kar sem naredil je bilo to, da sem zalaufal X in odprl Xterm in
pritsnil eno tipko in zaprl je Xterm.

			Andy
-- 
                       * / *     andrejc na tyr.fe.uni-lj.si
 /-\ |  | |-\  \  /     \|/      http://www.nevtron.si/andy/
 | | |\ | |  |  \/    \--*--\    
 +-+ | \| |  |  /       /|\      "Gabber is the only drug!"        
 | | |  | |-/  /       * / *                "Let's get drugged!!"