[LUGOS] External Iomega ZIP drive (USB)

Jerko Bostjan Bostjan.Jerko at skb.si
Fri Nov 23 07:06:25 CET 2001


Hm, poglej na www.linuxusb.org (ce nic drugega, bos vsaj dobil vsaj kaksne
linke za naprej).

B.

-----Original Message-----
From: Andrej Trobentar [mailto:andrej.trobentar at volja.net]
Sent: Thursday, November 22, 2001 5:07 PM
To: lugos-list at lugos.si
Subject: RE: [LUGOS] External Iomega ZIP drive (USB)


Zdravo!

V racunalniku nimam nobene SCSI kartice. Poizkusil sem z sdb4 pa dobim enako
error kor pri sda4. Lahko, da je to kaksen bug. Kam se obrniti za se dodatno
pomoc? Mogoce se ima kdo kaksno idejo kaj naj poizkusim?

Hvala vsem za vaso pomoc in lep pozdrav,

	Andrej.

> -----Original Message-----
> From: Jerko Bostjan [mailto:Bostjan.Jerko at skb.si]
> Sent: 22. november 2001 9:34
> To: 'lugos-list at lugos.si'
> Subject: RE: [LUGOS] External Iomega ZIP drive (USB)
>
>
> Ja, saj to je hec. V vecini navodil, ki sem jih pregledal
> govorijo o sdb4 in
> ne sda4.
> Amapk, ce ti deluje s sda4 potem ....
> Hm, pojavilo se mi je nekaj idej:
>
> 1. Imas slucajno se SCSI kartico ?
> 2. Mogoce je cela zadeva bug USB podpore, ki ta trenutek ni ravno blesteca
> (se posebej,
> ce imas zraven tudi SCSI kartico).
> 3. Poskusi se z mount-om sdb4 (se mi zdi, da ne bo delalo, ampak
> probati ni
> greh) - seveda,
> ce imas ta device. Ce ga nimas, ignoriraj.
>
> B.
>
> -----Original Message-----
> From: Andrej Trobentar [mailto:andrej.trobentar at volja.net]
> Sent: Thursday, November 22, 2001 9:25 AM
> To: lugos-list at lugos.si
> Subject: RE: [LUGOS] External Iomega ZIP drive (USB)
>
>
> Pozdrav!
>
> > -----Original Message-----
> > From: Jerko Bostjan [mailto:Bostjan.Jerko at skb.si]
> > Sent: 21. november 2001 18:56
> > To: 'lugos-list at lugos.si'
> > Subject: RE: [LUGOS] External Iomega ZIP drive (USB)
> >
> >
> >  Koliko pa imas major in minor sdb4 ?
>
> Najbrz mislis sda4 in ne sdb4. No, major in minor sta spodaj navedena.
>
> [root at server /root]# ll /dev/sda1 /dev/sda4
> brw-rw----   1 root     operator   8,   1 Feb 17  2000 /dev/sda1
> brw-rw----   1 root     operator   8,   4 Feb 17  2000 /dev/sda4
> [root at server /root]#
>
>
> > > -----Original Message-----
> > > From: Jerko Bostjan [mailto:Bostjan.Jerko at skb.si]
> > > Sent: 21. november 2001 13:50
> > > To: 'lugos-list at lugos.si'
> > > Subject: RE: [LUGOS] External Iomega ZIP drive (USB)
> > >
> > >
> > > Kaj ti izpise cat /proc/scsi/scsi ?
> >
> > [root at server /root]# cat /proc/scsi/scsi
> > Attached devices:
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> >   Vendor: IOMEGA   Model: ZIP 100          Rev: 48.X
> >   Type:   Direct-Access                    ANSI SCSI revision: 02
> > [root at server /root]#
> >
> > Hvala za pomoc in lep pozdrav,
> >
> > 	Andrej.
> >
> > >
> > > Rabim se kaj? Vkjucil sem vse to kaj je napisano spodaj :
> > >
> > > Make certain to either compile in USB support or make it available as
> > > modules. You need at least CONFIG_USB, CONFIG_USB_UHCI,
> > > CONFIG_USB_OHCI and
> > > CONFIG_USB_STORAGE. If you have other USB devices you may want to
> > select
> > > more.
> > >
> > > These drives also use scsi support so remember to turn this on in the
> > > kernel. Also you will need at least SCSI disk support, and SCSI
> > generic
> > > support. You might need more if you have other devices. I have a CD-R
> > and
> > > also select SCSI CD-ROM support
> > >
> > > Za razliko od tega imam jaz vse vkljuceno kar v kernel, torej nimam
> > > nobenega modula.
> > >
> > > Se kaksna ideja?
> > >
> > > Many thanks in lep pozdrav,
> > >
> > >        Andrej.
> > >



More information about the lugos-list mailing list