[LUGOS] External Iomega ZIP drive (USB)

[Andrej Trobentar]

> -----Original Message-----
> From: Jerko Bostjan [mailto:Bostjan.Jerko at skb.si]
> Sent: 21. november 2001 13:50
> To: 'lugos-list at lugos.si'
> Subject: RE: [LUGOS] External Iomega ZIP drive (USB)
> 
> 
> Kaj ti izpise cat /proc/scsi/scsi ?

[root at server /root]# cat /proc/scsi/scsi 
Attached devices: 
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: IOMEGA   Model: ZIP 100          Rev: 48.X
  Type:   Direct-Access                    ANSI SCSI revision: 02
[root at server /root]# 

Hvala za pomoc in lep pozdrav,

	Andrej.
 
> 
> Rabim se kaj? Vkjucil sem vse to kaj je napisano spodaj :
> 
> Make certain to either compile in USB support or make it available as
> modules. You need at least CONFIG_USB, CONFIG_USB_UHCI, 
> CONFIG_USB_OHCI and
> CONFIG_USB_STORAGE. If you have other USB devices you may want to select
> more.
> 
> These drives also use scsi support so remember to turn this on in the
> kernel. Also you will need at least SCSI disk support, and SCSI generic
> support. You might need more if you have other devices. I have a CD-R and
> also select SCSI CD-ROM support
> 
> Za razliko od tega imam jaz vse vkljuceno kar v kernel, torej nimam
> nobenega modula.
> 
> Se kaksna ideja?
> 
> Many thanks in lep pozdrav,
> 
>        Andrej.
>