[ LUGOS ] Mrezna
Rok Pergarec
rok at menuconfig.org
Wed Jun 6 21:37:32 CEST 2001
Najbrz vam bo to pomagalo:
~ cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
3).
Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
3).
Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=32.
I/O at 0xf000 [0xf00f].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 10.
Master Capable. Latency=32.
I/O at 0xd000 [0xd01f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 11, function 0:
Ethernet controller: Winbond Electronics Corp W89C840 (rev 0).
IRQ 10.
Master Capable. Latency=32. Min Gnt=1.Max Lat=16.
I/O at 0xd400 [0xd47f].
Non-prefetchable 32 bit memory at 0xdf000000 [0xdf00007f].
Bus 0, device 15, function 0:
Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 0).
IRQ 9.
Master Capable. Latency=32. Min Gnt=12.Max Lat=128.
I/O at 0xd800 [0xd83f].
Bus 0, device 19, function 0:
Unknown mass storage controller: Triones Technologies, Inc. HPT366
(rev 4).
IRQ 11.
Master Capable. Latency=120. Min Gnt=8.Max Lat=8.
I/O at 0xdc00 [0xdc07].
I/O at 0xe000 [0xe003].
I/O at 0xe400 [0xe407].
I/O at 0xe800 [0xe803].
I/O at 0xec00 [0xecff].
Bus 1, device 0, function 0:
VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
IRQ 12.
Non-prefetchable 32 bit memory at 0xd8000000 [0xd9ffffff].
Prefetchable 32 bit memory at 0xdc000000 [0xddffffff].
I/O at 0xc000 [0xc0ff].
----
~ ./winbond-diag
winbond-diag.c:v2.00 4/19/2000 Donald Becker (becker at scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Winbond W89c840 adapter at 0xd400.
This device appears to be active, so some registers will not be read.
To see all register values use the '-f' flag.
Port selection is 10mpbs-serial, half-duplex.
Transmit started, Receive started, half-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is '<invalid Tx state 5>'.
The transmit threshold is 72.
Rok
More information about the lugos-list
mailing list