[ LUGOS ] Dialin in ZyXEL 2864I

[Domen Semolic]

Zivjo!

> Zadnje case kar precej vprasujem, upam, da komu ne ze presedam (razen
> NotKnownu... :)

eh sej nisi edini :))) 

> Anyway: Dobil sem ta modem, ki je v topicu, ga z mgettyjem skonfiguriral
> za dialin... nastavil options.server, mgetty scompilal z -DAUTO_PPP,
> skratka... vse kar sem prebral in vedel nardit... a se vedno, ko se
> hocem
> z drugim HISAX ISDN adapterjem povezat nanj... pise v mg_log.ttyS1 to:
> 
> 08/31 19:19:35 yS1   got:  38400/PPP  64000/NONE[0d][0a] ** found **
> 08/31 19:19:35 yS1   waiting for line to clear (VTIME), read:
> 08/31 19:19:35 yS1   utmp + wtmp entry made
> 08/31 19:19:36 yS1   tio_set_flow_control( HARD )
> 08/31 19:19:36 yS1   getlogname (AUTO_PPP), read:[0d]
> 08/31 19:19:46 yS1   input finished with '\r', setting ICRNL ONLCR
> 08/31 19:19:46 yS1   tio_set_flow_control( HARD )
> 08/31 19:19:46 yS1   getlogname (AUTO_PPP), read:[0a]
> 08/31 19:19:46 yS1   tio_set_flow_control( HARD )
> 08/31 19:19:46 yS1   getlogname (AUTO_PPP), read:NO CARRIE[0d]
> 08/31 19:19:46 yS1   tio_set_flow_control( HARD )
> 08/31 19:19:46 yS1   getlogname (AUTO_PPP), read:[0a]
> 08/31 19:19:46 yS1   tio_set_flow_control( HARD )
> 08/31 19:19:46 yS1   getlogname (AUTO_PPP), read:
> 08/31 19:19:46 ##### failed dev=ttyS1, pid=667, got signal 1, exiting

aha sklepam da uporabljas ppp...poraj na winsux masini
uporabit hyper terminal...ker z dial-up-om ti nebo ratal...no vsaj meni ni!


lp,
dodo