[ LUGOS ] problemi z dcc-jem

[Metod Novak]

Zivjo

Ce bi kdo prebral how to od ipchainsov bi videl da je vse lepo opisano....

Da vam prihranim nekaj casa...

mIRC doesn't work with DCC Sends This is a configuration problem on your
copy of mIRC. To fix this, first disconnect mIRC from the IRC server. Now in
mIRC, go to File --> Setup and click on the "IRC servers tab". Make sure
that it is set to port 6667. If you require other ports, see below. Next,
goto File --> Setup --> Local Info and clear the fields for Local Host and
IP Address. Now select the checkboxes for "LOCAL HOST" and "IP address" (IP
address may be checked but disabled). Next under "Lookup Method", configure
it for "normal". It will NOT work if "server" is selected. That's it. Try to
the IRC server again. If you require IRC server ports other than 6667, (for
example, 6969) you need to edit the /etc/rc.d/rc.firewall startup file where
you load the IRC MASQ modules. Edit this file and the line for "modprobe
ip_masq_irc" and add to this line "ports=6667,6969". You can add additional
ports as long as they are separated with commas. Finally, close down any IRC
clients on any MASQed machines and re-load the IRC MASQ module

Upam da ti bo pomagalo
----- Original Message -----
From: Bostjan Muller <neonatus na gimp.thz.net>
To: LUGOS lista <lugos-list na lugos.si>
Sent: Friday, April 07, 2000 12:55 AM
Subject: [ LUGOS ] problemi z dcc-jem


> Pozdravljeni!
>
> Ze nekaj casa (odkar imam kernel 2.2.x na firewall masini) ugotavljam da
mi dcc
> prenosi preko irca delajo le se v 1 smeri - lahko le se sprejemam fajle,
> posiljati pa jih ne morem vec :(
> Modul za ipchains je zaloadan, vendar pise da ga ni v uporabi, medtem, ko
> naprimer ftp dela brez problemov.
> Firewall in masq postavim z ukazi:
> /sbin/ipchains -F
>         /sbin/ipchains -P input ACCEPT
>         /sbin/ipchains -P output ACCEPT
>         /sbin/ipchains -P forward DENY
>         /sbin/ipchains -A input -f -j ACCEPT
>         /sbin/ipchains -A output -f -j ACCEPT
>         /sbin/ipchains -A forward -f -j ACCEPT
>         /sbin/ipchains -A forward -j MASQ -s 192.168.1.0/24 -d 0.0.0.0/0
>
> za tem zaloadam module za maskerado:
> /sbin/modprobe ip_masq_cuseeme
> /sbin/modprobe ip_masq_ftp
> /sbin/modprobe ip_masq_irc
> /sbin/modprobe ip_masq_raudio
> /sbin/modprobe ip_masq_user
> /sbin/modprobe ip_masq_vdolive
>
> Lsmod tudi pokaze, da so moduli zagnani, nobene napake ne zaznam nikjer.
>
> Zanima me ce se je ze kdo srecal s podobnim problemom in ce se je kako bi
se ga
> dalo odpraviti.
>
> Vnaprej hvala!
>
> Bostjan