[ LUGOS ] more postfix

[Branko F. Gračner]

root na vampyria:~# cat /var/log/maillog

Sep  3 02:03:33 vampyria postfix/smtpd[8856]: connect from
vampyria[192.168.7.1]
Sep  3 02:03:33 vampyria postfix/smtpd[8856]: 501D82956:
client=vampyria[192.168.7.1]
Sep  3 02:03:33 vampyria postfix/cleanup[8857]: 501D82956:
message-id=<Pine.LNX.4.10.9909030203130.8889-100000 na vampyria>
Sep  3 02:03:33 vampyria postfix/smtpd[8856]: disconnect from
vampyria[192.168.7.1]
Sep  3 02:03:33 vampyria postfix/qmgr[8854]: 501D82956:
from=<branko na twinkle.net>, size=502 (queue active)
Sep  3 02:03:33 vampyria postfix/qmgr[8854]: 501D82956:
to=<branko na vampyria.twinkle.net>, relay=none, delay=0, status=deferred
(unknown mail transport error)

to je samo za eno sporočilo ...

poslal sem s pine

pripel sem main.cf

kje grešim ?

Brane

queue_directory = /var/spool/postfix
program_directory = /some/where/postfix/bin
command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.

3 # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

myhostname = vampyria.twinkle.net
#myhostname = virtual.domain.name
mydomain = twinkle.net
myorigin = $myhostname
#inet_interfaces = all
inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost

# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain. Do not specify the
# names of domains that this machine is backup MX host for. Specify
# those names via the relay_domains or permit_mx_backup settings for
# the SMTP server (see sample-smtpd.cf.
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key.  Continue long lines by starting the
# next line with whitespace.
#
mydestination = $myhostname, localhost.$mydomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
#	mail.$mydomain, www.$mydomain, ftp.$mydomain

# INTERNET VERSUS INTRANET
#
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When

 H# no relayhost is given, mail is routed directly to the destination.
# 
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# Specify a domain, host, host:port, [address] or [address:port].
# Use the form [destination] to turn off MX lookups. See also the
# default_transport parameter if you're connected via UUCP.
#
relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
0:14 .#relayhost = [mail.$mydomain:9999]

# DEFAULT TRANSPORT
#
# The default_transport parameter specifies the default message

4:54 s# delivery transport to use when no transport is explicitly given in
# the optional transport(5) table.
#
default_transport = smtp
#default_transport = uucp

# ADDRESS REWRITING
#
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
#
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# Insert text from sample-virtual.cf if you need virtual domain support.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.
-160 
# TRANSPORT MAP
#
# Insert text from sample-transport.cf if you need explicit routing.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# 
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# DELIVERED-TO
#
# The prepend_delivered_header controls when Postfix should prepend
# a Delivered-To: message header.
#
# By default, Postfix prepends a Delivered-To: header when forwarding
# mail and when delivering to file (mailbox) or command.  Turning off
# the Delivered-To: header when forwarding mail is not recommended.
#
prepend_delivered_header = command, file, forward
# prepend_delivered_header = forward

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
# recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox relative to a user's home directory. The default is to
# deliver to the UNIX-style /var/spool/mail/user or /var/mail/user.
# Specify "Maildir/" for qmail-style delivery (the / is required).
#
home_mailbox = Mailbox
#home_mailbox = Maildir/
 
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
# mail_spool_directory = /var/mail
# mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown local recipients
# is bounced.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay = $user na other.host
# luser_relay = $local na other.host
# luser_relay = admin+$local
  
# JUNK MAIL CONTROLS
# 
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.

# The header_checks parameter restricts what may appear in message
# headers. This requires that POSIX or PCRE regular expression support
# is built-in. Specify "/^header-name: stuff you do not want/ REJECT"
# in the pattern file. Patterns are case-insensitive by default. Note:
# specify only patterns ending in REJECT. Patterns ending in OK are
# mostly a waste of cycles.
#
#header_checks = regexp:/etc/postfix/filename
#header_checks = pcre:/etc/postfix/filename

# The relay_domains parameter restricts what domains (and subdomains
# thereof) this mail system will relay mail from or to.  See the
# smtpd_recipient_restrictions restriction in the file sample-smtpd.cf.
#
# By default, Postfix relays mail only from or to sites in or below
# $mydestination, or in the optional virtual domain list.
# 
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#
#relay_domains = $mydestination, $virtual_maps

# The mynetworks parameter specifies the list of networks that are
# local to this machine.  The list is used by the anti-UCE software
# to distinguish local clients from strangers. See permit_mynetworks
# and smtpd_recipient_restrictions in the file sample-smtpd.cf file.
#
# The default is a list of all networks attached to the machine:  a
# complete class A network (X.0.0.0/8), a complete class B network
# (X.X.0.0/16), and so on. If you want stricter control, specify a
# list of network/mask patterns, where the mask specifies the number
# of bits in the network part of a host address. You can also specify
# the absolute pathname of a pattern file instead of listing the
# patterns here.
#
mynetworks = 192.168.7.0/24, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# status code in the SMTP greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify the $myhostname at the start of the text. When
# the SMTP client sees its own hostname at the start of an SMTP
# greeting banner it will report a mailer loop. That's better than
# having a machine meltdown.
#
#smtpd_banner = $myhostname ESMTP $mail_name
smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# 
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit.

local_destination_concurrency_limit = 2
default_destination_concurrency_limit = 10

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
# debug_peer_list = 127.0.0.1
# debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
	 PATH=/usr/bin:/usr/X11R6/bin
	 xxgdb $daemon_directory/$process_name $process_id & sleep 5

# Other configurable parameters.