[ LUGOS ] Cudna obnasanje preko neta

[Milan Gabor]

Hi!
Oni tool je izpljunil tole :

tulip-diag.c:v1.10 4/12/99 Donald Becker (becker na cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DS21143 Tulip adapter at 0x7000.
 Port selection is 100mbps-SYM/PCS 100baseTx scrambler, full-duplex.
 Transmit started, Receive started, full-duplex.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.


Prej sem pozabil omeniti, da ce recimo dam cat na filu, potem zasteka stvar
takoj.
Torej ko zacne prenasa velike kolicine podatkov. Takrat odpove.

Ce ne bo resitve, jo bom dal kar na 10 Mb. Ni tako zelo mission kritikal


lp,
MIlan


> -----Original Message-----
> From: owner-lugos-list na www.lugos.si
> [mailto:owner-lugos-list na www.lugos.si]On Behalf Of Metod Kozelj
> Sent: Friday, August 06, 1999 1:40 PM
> To: lugos-list na lugos.si
> Subject: RE: [ LUGOS ] Cudna obnasanje preko neta
>
>
> Howdy!
>
> On Fri, 6 Aug 1999, Milan Gabor wrote:
>
> > Tole je za 7 dni uptima :
> > eth0      Link encap:Ethernet  HWaddr 00:80:48:CD:B7:B8
> >           inet addr:164.8.253.99  Bcast:164.8.253.255
> Mask:255.255.255.0
> >           UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
> >           RX packets:4210817 errors:8711 dropped:0 overruns:0 frame:8715
> >           TX packets:60106 errors:841 dropped:0 overruns:0 carrier:841
> >           collisions:17 txqueuelen:100
> >           Interrupt:3 Base address:0x7000
>
> Za kartice, ki jih goni tulip driver, imas tudi diagnosticni program.
> Priporocam tudi instalacijo najnovejsega driverja
> (http://cesdis.gsfc.nasa.gov/linux/drivers/tulip.html), saj v stock
> kernelu niso vedno najnovejsi.
>
> Peace!
>   Mkx
>
> ---- perl -e 'print
> $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
>