[ LUGOS ] problems with X server (fwd)

[The Creator]

Heja!

Imam graficno kartico Creative labs Exxtreme blaster z 8MB SGRAM in 
3DLabs Permedia 2 procesorjem. Ta procesor se ni supportan pri Xfree, so 
ga pa implementirali pri SUSE (http://www.suse.de) za kartico ELSA Winner 
2000. Sedaj pa problem: ce zalaufam kot kaj drugega kot VGA16 pade v en 
cuden mode in neha posiljati signal na monitor (vem, ker se monitor ugasne).
Ce ga zalaufam z SuSe serverjem mi izpise naslednjo stvar: 

XSuSE_Elsa_GLoria 2.0 / X Window System
based on XFree86 Version 3.9v 
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 9 1997
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (send problem reports to x na suse.de)
Operating System: Linux 2.0.30 i586 [ELF] 
Configured drivers:
  GLINT: accelerated server for 3DLabs GLINT graphics adapters
(Patchlevel 0)

Copyright 1997 S.u.S.E. GmbH, F<FC>rth
Copyright 1992-1997 The XFree86 Project, Inc.

Permission is hereby granted, free of charge, to any person to
redistribute this software and its documentation verbatim (including
all files and documentation without any changes) for any purpose
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation.

(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200
(**) GLINT: Graphics device ID: "ELSA GLoria-S"
(**) GLINT: Monitor ID: "My Monitor"
(--) GLINT: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) GLINT: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) GLINT: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) GLINT: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) GLINT: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) GLINT: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) GLINT: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/
usr/X11R6/lib/X11/fonts/75dpi/"
(--) GLINT: found TI chip GLINT Permedia 2 at card #3 func #0 with base 
0xeffe00
00
(--) GLINT: Framebuffer address at 0xee800000
(--) GLINT: videoram : 4096k
(--) GLINT: Using builtin RAMDAC of Permedia 2 chip
(**) GLINT: Option "pci_retry"
(--) GLINT: Maximum allowed dot-clock: 220.000 MHz
(--) GLINT: Mode "1024x768": Cannot support interlaced modes, deleting.
(--) GLINT: Mode "1152x864": Cannot support interlaced modes, deleting.
(--) GLINT: Mode "1280x1024": Cannot support interlaced modes, deleting.
(**) GLINT: Mode "800x600": mode clock =  69.650
(--) GLINT: GLINT chipset currently only supports one modeline.

Fatal server error:
Caught signal 11.  Server aborting


When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.

----------------------------------

Can you help me?

				Andy

-- 
URL: http://andy.here.ml.org/  |  Freelance software and homepage
   E-MAIL:   andy na here.ml.org  |  developer under UNIX and all
      TEL:  +386 61 152 15 07  |  versions of M.S. Windows.