[LUGOS] SESSIONS & PHP
Marko Mernik
marci at mernik.net
Tue Dec 18 09:49:37 CET 2007
Dobro jutro!
session.save_path ti manka.. (saj jest ga nism opazu..)
lp, marci
mitja pravi:
> Zdravo!
>
> Spodaj je konfiguracijska datoteka za PHP.
> Zanima me zakaj mi php ne kreira SESSION spremenljivk.
> Kakšna ideja?
>
> Hvala!
>
> Lp,
> Mitja
>
> [PHP]
>
> ;;;;;;;;;;;;;;;;;;;
> ; About php.ini ;
> ;;;;;;;;;;;;;;;;;;;
> ; This file controls many aspects of PHP's behavior. In order for PHP
> to
> ; read it, it must be named 'php.ini'. PHP looks for it in the current
> ; working directory, in the path designated by the environment variable
> ; PHPRC, and in the path that was defined in compile time (in that
> order).
> ; Under Windows, the compile-time path is the Windows directory. The
> ; path in which the php.ini file is looked for can be overridden using
> ; the -c argument in command line mode.
> ;
> ; The syntax of the file is extremely simple. Whitespace and Lines
> ; beginning with a semicolon are silently ignored (as you probably
> guessed).
> ; Section headers (e.g. [Foo]) are also silently ignored, even though
> ; they might mean something in the future.
> ;
> ; Directives are specified using the following syntax:
> ; directive = value
> ; Directive names are *case sensitive* - foo=bar is different from
> FOO=bar.
> ;
> ; The value can be a string, a number, a PHP constant (e.g. E_ALL or
> M_PI), one
> ; of the INI constants (On, Off, True, False, Yes, No and None) or an
> expression
> ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
> ;
> ; Expressions in the INI file are limited to bitwise operators and
> parentheses:
> ; | bitwise OR
> ; & bitwise AND
> ; ~ bitwise NOT
> ; ! boolean NOT
> ;
> ; Boolean flags can be turned on using the values 1, On, True or Yes.
> ; They can be turned off using the values 0, Off, False or No.
> ;
> ; An empty string can be denoted by simply not writing anything after
> the equal
> ; sign, or by using the None keyword:
> ;
> ; foo = ; sets foo to an empty string
> ; foo = none ; sets foo to an empty string
> ; foo = "none" ; sets foo to the string 'none'
> ;
> ; If you use constants in your value, and these constants belong to a
> ; dynamically loaded extension (either a PHP extension or a Zend
> extension),
> ; you may only use these constants *after* the line that loads the
> extension.
> ;
> ;
> ;;;;;;;;;;;;;;;;;;;
> ; About this file ;
> ;;;;;;;;;;;;;;;;;;;
> ; This is the recommended, PHP 5-style version of the php.ini-dist file.
> It
> ; sets some non standard settings, that make PHP more efficient, more
> secure,
> ; and encourage cleaner coding.
> ;
> ; The price is that with these settings, PHP may be incompatible with
> some
> ; applications, and sometimes, more difficult to develop with. Using
> this
> ; file is warmly recommended for production sites. As all of the
> changes from
> ; the standard settings are thoroughly documented, you can go over each
> one,
> ; and decide whether you want to use it or not.
> ;
> ; For general information about the php.ini file, please consult the
> php.ini-dist
> ; file, included in your PHP distribution.
> ;
> ; This file is different from the php.ini-dist file in the fact that it
> features
> ; different values for several directives, in order to improve
> performance, while
> ; possibly breaking compatibility with the standard out-of-the-box
> behavior of
> ; PHP. Please make sure you read what's different, and modify your
> scripts
> ; accordingly, if you decide to use this file instead.
> ;
> ; - register_long_arrays = Off [Performance]
> ; Disables registration of the older (and deprecated) long
> predefined array
> ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
> ; introduced in PHP 4.1.0
> ; - display_errors = Off [Security]
> ; With this directive set to off, errors that occur during the
> execution of
> ; scripts will no longer be displayed as a part of the script
> output, and thus,
> ; will no longer be exposed to remote users. With some errors, the
> error message
> ; content may expose information about your script, web server, or
> database
> ; server that may be exploitable for hacking. Production sites
> should have this
> ; directive set to off.
> ; - log_errors = On [Security]
> ; This directive complements the above one. Any errors that occur
> during the
> ; execution of your script will be logged (typically, to your
> server's error log,
> ; but can be configured in several ways). Along with setting
> display_errors to off,
> ; this setup gives you the ability to fully understand what may have
> gone wrong,
> ; without exposing any sensitive information to remote users.
> ; - output_buffering = 4096 [Performance]
> ; Set a 4KB output buffer. Enabling output buffering typically
> results in less
> ; writes, and sometimes less packets sent on the wire, which can
> often lead to
> ; better performance. The gain this directive actually yields
> greatly depends
> ; on which Web server you're working with, and what kind of scripts
> you're using.
> ; - register_argc_argv = Off [Performance]
> ; Disables registration of the somewhat redundant $argv and $argc
> global
> ; variables.
> ; - magic_quotes_gpc = Off [Performance]
> ; Input data is no longer escaped with slashes so that it can be
> sent into
> ; SQL databases without further manipulation. Instead, you should
> use the
> ; function addslashes() on each input element you wish to send to a
> database.
> ; - variables_order = "GPCS" [Performance]
> ; The environment variables are not hashed into the $_ENV. To
> access
> ; environment variables, you can use getenv() instead.
> ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
> ; By default, PHP suppresses errors of type E_NOTICE. These error
> messages
> ; are emitted for non-critical errors, but that could be a symptom
> of a bigger
> ; problem. Most notably, this will cause error messages about the
> use
> ; of uninitialized variables to be displayed.
> ; - allow_call_time_pass_reference = Off [Code cleanliness]
> ; It's not possible to decide to force a variable to be passed by
> reference
> ; when calling a function. The PHP 4 style to do this is by making
> the
> ; function require the relevant argument by reference.
>
> ;;;;;;;;;;;;;;;;;;;;
> ; Language Options ;
> ;;;;;;;;;;;;;;;;;;;;
>
> ; Enable the PHP scripting language engine under Apache.
> engine = On
>
> ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
> zend.ze1_compatibility_mode = Off
>
> ; Allow the <? tag. Otherwise, only <?php and <script> tags are
> recognized.
> ; NOTE: Using short tags should be avoided when developing applications
> or
> ; libraries that are meant for redistribution, or deployment on PHP
> ; servers which are not under your control, because short tags may not
> ; be supported on the target server. For portable, redistributable code,
> ; be sure not to use short tags.
> short_open_tag = On
>
> ; Allow ASP-style <% %> tags.
> asp_tags = Off
>
> ; The number of significant digits displayed in floating point numbers.
> precision = 14
>
> ; Enforce year 2000 compliance (will cause problems with non-compliant
> browsers)
> y2k_compliance = On
>
> ; Output buffering allows you to send header lines (including cookies)
> even
> ; after you send body content, at the price of slowing PHP's output
> layer a
> ; bit. You can enable output buffering during runtime by calling the
> output
> ; buffering functions. You can also enable output buffering for all
> files by
> ; setting this directive to On. If you wish to limit the size of the
> buffer
> ; to a certain size - you can use a maximum number of bytes instead of
> 'On', as
> ; a value for this directive (e.g., output_buffering=4096).
> output_buffering = 4096
>
> ; You can redirect all of the output of your scripts to a function. For
> ; example, if you set output_handler to "mb_output_handler", character
> ; encoding will be transparently converted to the specified encoding.
> ; Setting any output handler automatically turns on output buffering.
> ; Note: People who wrote portable scripts should not depend on this ini
> ; directive. Instead, explicitly set the output handler using
> ob_start().
> ; Using this ini directive may cause problems unless you know what
> script
> ; is doing.
> ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
> ; and you cannot use both "ob_gzhandler" and
> "zlib.output_compression".
> ; Note: output_handler must be empty if this is set 'On' !!!!
> ; Instead you must use zlib.output_handler.
> ;output_handler =
>
> ; Transparent output compression using the zlib library
> ; Valid values for this option are 'off', 'on', or a specific buffer
> size
> ; to be used for compression (default is 4KB)
> ; Note: Resulting chunk size may vary due to nature of compression. PHP
> ; outputs chunks that are few hundreds bytes each as a result of
> ; compression. If you prefer a larger chunk size for better
> ; performance, enable output_buffering in addition.
> ; Note: You need to use zlib.output_handler instead of the standard
> ; output_handler, or otherwise the output will be corrupted.
> zlib.output_compression = On
> ;zlib.output_compression_level = -1
>
> ; You cannot specify additional output handlers if
> zlib.output_compression
> ; is activated here. This setting does the same as output_handler but in
> ; a different order.
> ;zlib.output_handler =
>
> ; Implicit flush tells PHP to tell the output layer to flush itself
> ; automatically after every output block. This is equivalent to calling
> the
> ; PHP function flush() after each and every call to print() or echo()
> and each
> ; and every HTML block. Turning this option on has serious performance
> ; implications and is generally recommended for debugging purposes only.
> implicit_flush = Off
>
> ; The unserialize callback function will be called (with the undefined
> class'
> ; name as parameter), if the unserializer finds an undefined class
> ; which should be instantiated.
> ; A warning appears if the specified function is not defined, or if the
> ; function doesn't include/implement the missing class.
> ; So only set this entry, if you really want to implement such a
> ; callback-function.
> unserialize_callback_func=
>
> ; When floats & doubles are serialized store serialize_precision
> significant
> ; digits after the floating point. The default value ensures that when
> floats
> ; are decoded with unserialize, the data will remain the same.
> serialize_precision = 100
>
> ; Whether to enable the ability to force arguments to be passed by
> reference
> ; at function call time. This method is deprecated and is likely to be
> ; unsupported in future versions of PHP/Zend. The encouraged method of
> ; specifying which arguments should be passed by reference is in the
> function
> ; declaration. You're encouraged to try and turn this option Off and
> make
> ; sure your scripts work properly with it in order to ensure they will
> work
> ; with future versions of the language (you will receive a warning each
> time
> ; you use this feature, and the argument will be passed by value instead
> of by
> ; reference).
> allow_call_time_pass_reference = Off
>
> ;
> ; Safe Mode
> ;
> safe_mode = Off
>
> ; By default, Safe Mode does a UID compare check when
> ; opening files. If you want to relax this to a GID compare,
> ; then turn on safe_mode_gid.
> safe_mode_gid = Off
>
> ; When safe_mode is on, UID/GID checks are bypassed when
> ; including files from this directory and its subdirectories.
> ; (directory must also be in include_path or full path must
> ; be used when including)
> safe_mode_include_dir =
>
> ; When safe_mode is on, only executables located in the
> safe_mode_exec_dir
> ; will be allowed to be executed via the exec family of functions.
> safe_mode_exec_dir =
>
> ; Setting certain environment variables may be a potential security
> breach.
> ; This directive contains a comma-delimited list of prefixes. In Safe
> Mode,
> ; the user may only alter environment variables whose names begin with
> the
> ; prefixes supplied here. By default, users will only be able to set
> ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
> ;
> ; Note: If this directive is empty, PHP will let the user modify ANY
> ; environment variable!
> safe_mode_allowed_env_vars = PHP_
>
> ; This directive contains a comma-delimited list of environment
> variables that
> ; the end user won't be able to change using putenv(). These variables
> will be
> ; protected even if safe_mode_allowed_env_vars is set to allow to change
> them.
> safe_mode_protected_env_vars = LD_LIBRARY_PATH
>
> ; open_basedir, if set, limits all file operations to the defined
> directory
> ; and below. This directive makes most sense if used in a per-directory
> ; or per-virtualhost web server configuration file. This directive is
> ; *NOT* affected by whether Safe Mode is turned On or Off.
> ;open_basedir =
>
> ; This directive allows you to disable certain functions for security
> reasons.
> ; It receives a comma-delimited list of function names. This directive
> is
> ; *NOT* affected by whether Safe Mode is turned On or Off.
> disable_functions =
>
> ; This directive allows you to disable certain classes for security
> reasons.
> ; It receives a comma-delimited list of class names. This directive is
> ; *NOT* affected by whether Safe Mode is turned On or Off.
> disable_classes =
>
> ; Colors for Syntax Highlighting mode. Anything that's acceptable in
> ; <span style="color: ???????"> would work.
> ;highlight.string = #DD0000
> ;highlight.comment = #FF9900
> ;highlight.keyword = #007700
> ;highlight.bg = #FFFFFF
> ;highlight.default = #0000BB
> ;highlight.html = #000000
>
> ; If enabled, the request will be allowed to complete even if the user
> aborts
> ; the request. Consider enabling it if executing long request, which may
> end up
> ; being interrupted by the user or a browser timing out.
> ; ignore_user_abort = On
>
> ; Determines the size of the realpath cache to be used by PHP. This
> value should
> ; be increased on systems where PHP opens many files to reflect the
> quantity of
> ; the file operations performed.
> ; realpath_cache_size=16k
>
> ; Duration of time, in seconds for which to cache realpath information
> for a given
> ; file or directory. For systems with rarely changing files, consider
> increasing this
> ; value.
> ; realpath_cache_ttl=120
>
> ;
> ; Misc
> ;
> ; Decides whether PHP may expose the fact that it is installed on the
> server
> ; (e.g. by adding its signature to the Web server header). It is no
> security
> ; threat in any way, but it makes it possible to determine whether you
> use PHP
> ; on your server or not.
> expose_php = On
>
>
> ;;;;;;;;;;;;;;;;;;;
> ; Resource Limits ;
> ;;;;;;;;;;;;;;;;;;;
>
> max_execution_time = 30
> max_input_time = 60
> memory_limit = 40M
>
>
> ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
> ; Error handling and logging ;
> ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>
> ; error_reporting is a bit-field. Or each number up to get desired
> error
> ; reporting level
> ; E_ALL - All errors and warnings (doesn't include E_STRICT)
> ; E_ERROR - fatal run-time errors
> ; E_RECOVERABLE_ERROR - almost fatal run-time errors
> ; E_WARNING - run-time warnings (non-fatal errors)
> ; E_PARSE - compile-time parse errors
> ; E_NOTICE - run-time notices (these are warnings which often
> result
> ; from a bug in your code, but it's possible that it
> was
> ; intentional (e.g., using an uninitialized variable
> and
> ; relying on the fact it's automatically initialized
> to an
> ; empty string)
> ; E_STRICT - run-time notices, enable to have PHP suggest
> changes
> ; to your code which will ensure the best
> interoperability
> ; and forward compatibility of your code
> ; E_CORE_ERROR - fatal errors that occur during PHP's initial
> startup
> ; E_CORE_WARNING - warnings (non-fatal errors) that occur during
> PHP's
> ; initial startup
> ; E_COMPILE_ERROR - fatal compile-time errors
> ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
> ; E_USER_ERROR - user-generated error message
> ; E_USER_WARNING - user-generated warning message
> ; E_USER_NOTICE - user-generated notice message
> ;
> ; Examples:
> ;
> ; - Show all errors, except for notices and coding standards warnings
> ;
> ;error_reporting = E_ALL & ~E_NOTICE
> ;
> ; - Show all errors, except for notices
> ;
> ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
> ;
> ; - Show only errors
> ;
> ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|
> E_CORE_ERROR
> ;
> ; - Show all errors, except coding standards warnings
> ;
> error_reporting = E_ALL|E_ERROR|E_WARNING|E_PARSE|E_NOTICE|E_CORE_ERROR|
> E_CORE_WARNING|E_COMPILE_ERROR|E_COMPILE_WARNING|E_USER_ERROR|
> E_USER_WARNING|E_USER_NOTICE
>
> ; Print out errors (as a part of the output). For production web sites,
> ; you're strongly encouraged to turn this feature off, and use error
> logging
> ; instead (see below). Keeping display_errors enabled on a production
> web site
> ; may reveal security information to end users, such as file paths on
> your Web
> ; server, your database schema or other information.
> display_errors = On
>
> ; Even when display_errors is on, errors that occur during PHP's startup
> ; sequence are not displayed. It's strongly recommended to keep
> ; display_startup_errors off, except for when debugging.
> display_startup_errors = Off
>
> ; Log errors into a log file (server-specific log, stderr, or error_log
> (below))
> ; As stated above, you're strongly advised to use error logging in place
> of
> ; error displaying on production web sites.
> log_errors = On
>
> ; Set maximum length of log_errors. In error_log information about the
> source is
> ; added. The default is 1024 and 0 allows to not apply any maximum
> length at all.
> log_errors_max_len = 1024
>
> ; Do not log repeated messages. Repeated errors must occur in same file
> on same
> ; line until ignore_repeated_source is set true.
> ignore_repeated_errors = Off
>
> ; Ignore source of message when ignoring repeated messages. When this
> setting
> ; is On you will not log errors with repeated messages from different
> files or
> ; source lines.
> ignore_repeated_source = Off
>
> ; If this parameter is set to Off, then memory leaks will not be shown
> (on
> ; stdout or in the log). This has only effect in a debug compile, and if
> ; error reporting includes E_WARNING in the allowed list
> report_memleaks = On
>
> ;report_zend_debug = 0
>
> ; Store the last error/warning message in $php_errormsg (boolean).
> track_errors = Off
>
> ; Disable the inclusion of HTML tags in error messages.
> ; Note: Never use this feature for production boxes.
> ;html_errors = Off
>
> ; If html_errors is set On PHP produces clickable error messages that
> direct
> ; to a page describing the error or function causing the error in
> detail.
> ; You can download a copy of the PHP manual from
> http://www.php.net/docs.php
> ; and change docref_root to the base URL of your local copy including
> the
> ; leading '/'. You must also specify the file extension being used
> including
> ; the dot.
> ; Note: Never use this feature for production boxes.
> ;docref_root = "/phpmanual/"
> ;docref_ext = .html
>
> ; String to output before an error message.
> ;error_prepend_string = "<font color=ff0000>"
>
> ; String to output after an error message.
> ;error_append_string = "</font>"
>
> ; Log errors to specified file.
> error_log = syslog
>
> ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
> ;error_log = syslog
>
>
> ;;;;;;;;;;;;;;;;;
> ; Data Handling ;
> ;;;;;;;;;;;;;;;;;
> ;
> ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
>
> ; The separator used in PHP generated URLs to separate arguments.
> ; Default is "&".
> ;arg_separator.output = "&"
>
> ; List of separator(s) used by PHP to parse input URLs into variables.
> ; Default is "&".
> ; NOTE: Every character in this directive is considered as separator!
> ;arg_separator.input = ";&"
>
> ; This directive describes the order in which PHP registers GET, POST,
> Cookie,
> ; Environment and Built-in variables (G, P, C, E & S respectively, often
> ; referred to as EGPCS or GPC). Registration is done from left to
> right, newer
> ; values override older values.
> variables_order = "EGPCS"
>
> ; Whether or not to register the EGPCS variables as global variables.
> You may
> ; want to turn this off if you don't want to clutter your scripts'
> global scope
> ; with user data. This makes most sense when coupled with track_vars -
> in which
> ; case you can access all of the GPC variables through the
> $HTTP_*_VARS[],
> ; variables.
> ;
> ; You should do your best to write your scripts so that they do not
> require
> ; register_globals to be on; Using form variables as globals can easily
> lead
> ; to possible security problems, if the code is not very well thought
> of.
> register_globals = On
>
> ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
> ; and friends. If you're not using them, it's recommended to turn them
> off,
> ; for performance reasons.
> register_long_arrays = On
>
> ; This directive tells PHP whether to declare the argv&argc variables
> (that
> ; would contain the GET information). If you don't use these variables,
> you
> ; should turn it off for increased performance.
> register_argc_argv = On
>
> ; When enabled, the SERVER and ENV variables are created when they're
> first
> ; used (Just In Time) instead of when the script starts. If these
> variables
> ; are not used within a script, having this directive on will result in
> a
> ; performance gain. The PHP directives register_globals,
> register_long_arrays,
> ; and register_argc_argv must be disabled for this directive to have any
> affect.
> auto_globals_jit = On
>
> ; Maximum size of POST data that PHP will accept.
> post_max_size = 30M
>
> ; Magic quotes
> ;
>
> ; Magic quotes for incoming GET/POST/Cookie data.
> magic_quotes_gpc = On
>
> ; Magic quotes for runtime-generated data, e.g. data from SQL, from
> exec(), etc.
> magic_quotes_runtime = On
>
> ; Use Sybase-style magic quotes (escape ' with '' instead of \').
> magic_quotes_sybase = Off
>
> ; Automatically add files before or after any PHP document.
> auto_prepend_file =
> auto_append_file =
>
> ; As of 4.0b4, PHP always outputs a character encoding by default in
> ; the Content-type: header. To disable sending of the charset, simply
> ; set it to be empty.
> ;
> ; PHP's built-in default is text/html
> default_mimetype = "text/html"
> ;default_charset = "iso-8859-1"
>
> ; Always populate the $HTTP_RAW_POST_DATA variable.
> ;always_populate_raw_post_data = On
>
>
> ;;;;;;;;;;;;;;;;;;;;;;;;;
> ; Paths and Directories ;
> ;;;;;;;;;;;;;;;;;;;;;;;;;
>
> ; UNIX: "/path1:/path2"
> include_path = .:/var/www/include
> ;
> ; Windows: "\path1;\path2"
> ;include_path = ".;c:\php\includes"
>
> ; The root of the PHP pages, used only if nonempty.
> ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
> ; if you are running php as a CGI under any web server (other than IIS)
> ; see documentation for security issues. The alternate is to use the
> ; cgi.force_redirect configuration below
> doc_root =
>
> ; The directory under which PHP opens the script using /~username used
> only
> ; if nonempty.
> user_dir =
>
> ; Directory in which the loadable extensions (modules) reside.
> extension_dir = /usr/lib/php/modules
>
> ; Whether or not to enable the dl() function. The dl() function does
> NOT work
> ; properly in multithreaded servers, such as IIS or Zeus, and is
> automatically
> ; disabled on them.
> enable_dl = On
>
> ; cgi.force_redirect is necessary to provide security running PHP as a
> CGI under
> ; most web servers. Left undefined, PHP turns this on by default. You
> can
> ; turn it off here AT YOUR OWN RISK
> ; **You CAN safely turn this off for IIS, in fact, you MUST.**
> ; cgi.force_redirect = 1
>
> ; if cgi.nph is enabled it will force cgi to always sent Status: 200
> with
> ; every request.
> ; cgi.nph = 1
>
> ; if cgi.force_redirect is turned on, and you are not running under
> Apache or Netscape
> ; (iPlanet) web servers, you MAY need to set an environment variable
> name that PHP
> ; will look for to know it is OK to continue execution. Setting this
> variable MAY
> ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
> ; cgi.redirect_status_env = ;
>
> ; FastCGI under IIS (on WINNT based OS) supports the ability to
> impersonate
> ; security tokens of the calling client. This allows IIS to define the
> ; security context that the request runs under. mod_fastcgi under
> Apache
> ; does not currently support this feature (03/17/2002)
> ; Set to 1 if running under IIS. Default is zero.
> ; fastcgi.impersonate = 1;
>
> ; Disable logging through FastCGI connection
> ; fastcgi.log = 0
>
> ; cgi.rfc2616_headers configuration option tells PHP what type of
> headers to
> ; use when sending HTTP response code. If it's set 0 PHP sends Status:
> header that
> ; is supported by Apache. When this option is set to 1 PHP will send
> ; RFC2616 compliant header.
> ; Default is zero.
> ;cgi.rfc2616_headers = 0
>
>
> ;;;;;;;;;;;;;;;;
> ; File Uploads ;
> ;;;;;;;;;;;;;;;;
>
> ; Whether to allow HTTP file uploads.
> file_uploads = On
>
> ; Temporary directory for HTTP uploaded files (will use system default
> if not
> ; specified).
> ;upload_tmp_dir =
>
> ; Maximum allowed size for uploaded files.
> upload_max_filesize = 20M
>
>
> ;;;;;;;;;;;;;;;;;;
> ; Fopen wrappers ;
> ;;;;;;;;;;;;;;;;;;
>
> ; Whether to allow the treatment of URLs (like http:// or ftp://) as
> files.
> allow_url_fopen = On
>
> ; Whether to allow include/require to open URLs (like http:// or ftp://)
> as files.
> allow_url_include = Off
>
> ; Define the anonymous ftp password (your email address)
> ;from="john na doe.com"
>
> ; Define the User-Agent string
> ; user_agent="PHP"
>
> ; Default timeout for socket based streams (seconds)
> default_socket_timeout = 60
>
> ; If your scripts have to deal with files from Macintosh systems,
> ; or you are running on a Mac and need to deal with files from
> ; unix or win32 systems, setting this flag will cause PHP to
> ; automatically detect the EOL character in those files so that
> ; fgets() and file() will work regardless of the source of the file.
> ; auto_detect_line_endings = Off
>
>
> ;;;;;;;;;;;;;;;;;;;;;;
> ; Dynamic Extensions ;
> ;;;;;;;;;;;;;;;;;;;;;;
> ;
> ; If you wish to have an extension loaded automatically, use the
> following
> ; syntax:
> ;
> ; extension=modulename.extension
> ;
> ; For example:
> ;
> ; extension=msql.so
> ;
> ; Note that it should be the name of the module only; no directory
> information
> ; needs to go here. Specify the location of the extension with the
> ; extension_dir directive above.
>
>
> ;;;;
> ; Note: packaged extension modules are now loaded via the .ini files
> ; found in the directory /etc/php.d; these are loaded by default.
> ;;;;
>
>
> ;;;;;;;;;;;;;;;;;;;
> ; Module Settings ;
> ;;;;;;;;;;;;;;;;;;;
>
> [Date]
> ; Defines the default timezone used by the date functions
> ;date.timezone =
>
> ;date.default_latitude = 31.7667
> ;date.default_longitude = 35.2333
>
> ;date.sunrise_zenith = 90.583333
> ;date.sunset_zenith = 90.583333
>
> [filter]
> ;filter.default = unsafe_raw
> ;filter.default_flags =
>
> [iconv]
> ;iconv.input_encoding = ISO-8859-1
> ;iconv.internal_encoding = ISO-8859-1
> ;iconv.output_encoding = ISO-8859-1
>
> [sqlite]
> ;sqlite.assoc_case = 0
>
> [xmlrpc]
> ;xmlrpc_error_number = 0
> ;xmlrpc_errors = 0
>
> [Pcre]
> ;PCRE library backtracking limit.
> ;pcre.backtrack_limit=100000
>
> ;PCRE library recursion limit.
> ;Please note that if you set this value to a high number you may consume
> all
> ;the available process stack and eventually crash PHP (due to reaching
> the
> ;stack size limit imposed by the Operating System).
> ;pcre.recursion_limit=100000
>
> [Syslog]
> ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
> ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
> ; runtime, you can define these variables by calling
> define_syslog_variables().
> define_syslog_variables = Off
>
> [mail function]
> ; For Win32 only.
> SMTP = localhost
> smtp_port = 25
>
> ; For Win32 only.
> ;sendmail_from = me na example.com
>
> ; For Unix only. You may supply arguments as well (default: "sendmail
> -t -i").
> sendmail_path = "/usr/sbin/sendmail -t -i"
>
> ; Force the addition of the specified parameters to be passed as extra
> parameters
> ; to the sendmail binary. These parameters will always replace the value
> of
> ; the 5th parameter to mail(), even in safe mode.
> ;mail.force_extra_parameters =
>
> [SQL]
> sql.safe_mode = Off
>
> [ODBC]
> ;odbc.default_db = Not yet implemented
> ;odbc.default_user = Not yet implemented
> ;odbc.default_pw = Not yet implemented
>
> ; Allow or prevent persistent links.
> odbc.allow_persistent = On
>
> ; Check that a connection is still valid before reuse.
> odbc.check_persistent = On
>
> ; Maximum number of persistent links. -1 means no limit.
> odbc.max_persistent = -1
>
> ; Maximum number of links (persistent + non-persistent). -1 means no
> limit.
> odbc.max_links = -1
>
> ; Handling of LONG fields. Returns number of bytes to variables. 0
> means
> ; passthru.
> odbc.defaultlrl = 4096
>
> ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert
> to char.
> ; See the documentation on odbc_binmode and odbc_longreadlen for an
> explanation
> ; of uodbc.defaultlrl and uodbc.defaultbinmode
> odbc.defaultbinmode = 1
>
> [MySQL]
> ; Allow or prevent persistent links.
> mysql.allow_persistent = On
>
> ; Maximum number of persistent links. -1 means no limit.
> mysql.max_persistent = -1
>
> ; Maximum number of links (persistent + non-persistent). -1 means no
> limit.
> mysql.max_links = -1
>
> ; Default port number for mysql_connect(). If unset, mysql_connect()
> will use
> ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
> ; compile-time value defined MYSQL_PORT (in that order). Win32 will
> only look
> ; at MYSQL_PORT.
> mysql.default_port =
>
> ; Default socket name for local MySQL connects. If empty, uses the
> built-in
> ; MySQL defaults.
> mysql.default_socket =
>
> ; Default host for mysql_connect() (doesn't apply in safe mode).
> mysql.default_host =
>
> ; Default user for mysql_connect() (doesn't apply in safe mode).
> mysql.default_user =
>
> ; Default password for mysql_connect() (doesn't apply in safe mode).
> ; Note that this is generally a *bad* idea to store passwords in this
> file.
> ; *Any* user with PHP access can run 'echo
> get_cfg_var("mysql.default_password")
> ; and reveal this password! And of course, any users with read access
> to this
> ; file will be able to reveal the password as well.
> mysql.default_password =
>
> ; Maximum time (in seconds) for connect timeout. -1 means no limit
> mysql.connect_timeout = 60
>
> ; Trace mode. When trace_mode is active (=On), warnings for table/index
> scans and
> ; SQL-Errors will be displayed.
> mysql.trace_mode = Off
>
> [MySQLi]
>
> ; Maximum number of links. -1 means no limit.
> mysqli.max_links = -1
>
> ; Default port number for mysqli_connect(). If unset, mysqli_connect()
> will use
> ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
> ; compile-time value defined MYSQL_PORT (in that order). Win32 will
> only look
> ; at MYSQL_PORT.
> mysqli.default_port = 3306
>
> ; Default socket name for local MySQL connects. If empty, uses the
> built-in
> ; MySQL defaults.
> mysqli.default_socket =
>
> ; Default host for mysql_connect() (doesn't apply in safe mode).
> mysqli.default_host =
>
> ; Default user for mysql_connect() (doesn't apply in safe mode).
> mysqli.default_user =
>
> ; Default password for mysqli_connect() (doesn't apply in safe mode).
> ; Note that this is generally a *bad* idea to store passwords in this
> file.
> ; *Any* user with PHP access can run 'echo
> get_cfg_var("mysqli.default_pw")
> ; and reveal this password! And of course, any users with read access
> to this
> ; file will be able to reveal the password as well.
> mysqli.default_pw =
>
> ; Allow or prevent reconnect
> mysqli.reconnect = Off
>
> [mSQL]
> ; Allow or prevent persistent links.
> msql.allow_persistent = On
>
> ; Maximum number of persistent links. -1 means no limit.
> msql.max_persistent = -1
>
> ; Maximum number of links (persistent+non persistent). -1 means no
> limit.
> msql.max_links = -1
>
> [PostgresSQL]
> ; Allow or prevent persistent links.
> pgsql.allow_persistent = On
>
> ; Detect broken persistent links always with pg_pconnect().
> ; Auto reset feature requires a little overheads.
> pgsql.auto_reset_persistent = Off
>
> ; Maximum number of persistent links. -1 means no limit.
> pgsql.max_persistent = -1
>
> ; Maximum number of links (persistent+non persistent). -1 means no
> limit.
> pgsql.max_links = -1
>
> ; Ignore PostgreSQL backends Notice message or not.
> ; Notice message logging require a little overheads.
> pgsql.ignore_notice = 0
>
> ; Log PostgreSQL backends Noitce message or not.
> ; Unless pgsql.ignore_notice=0, module cannot log notice message.
> pgsql.log_notice = 0
>
> [Sybase]
> ; Allow or prevent persistent links.
> sybase.allow_persistent = On
>
> ; Maximum number of persistent links. -1 means no limit.
> sybase.max_persistent = -1
>
> ; Maximum number of links (persistent + non-persistent). -1 means no
> limit.
> sybase.max_links = -1
>
> ;sybase.interface_file = "/usr/sybase/interfaces"
>
> ; Minimum error severity to display.
> sybase.min_error_severity = 10
>
> ; Minimum message severity to display.
> sybase.min_message_severity = 10
>
> ; Compatibility mode with old versions of PHP 3.0.
> ; If on, this will cause PHP to automatically assign types to results
> according
> ; to their Sybase type, instead of treating them all as strings. This
> ; compatibility mode will probably not stay around forever, so try
> applying
> ; whatever necessary changes to your code, and turn it off.
> sybase.compatability_mode = Off
>
> [Sybase-CT]
> ; Allow or prevent persistent links.
> sybct.allow_persistent = On
>
> ; Maximum number of persistent links. -1 means no limit.
> sybct.max_persistent = -1
>
> ; Maximum number of links (persistent + non-persistent). -1 means no
> limit.
> sybct.max_links = -1
>
> ; Minimum server message severity to display.
> sybct.min_server_severity = 10
>
> ; Minimum client message severity to display.
> sybct.min_client_severity = 10
>
> [bcmath]
> ; Number of decimal digits for all bcmath functions.
> bcmath.scale = 0
>
> [browscap]
> ;browscap = extra/browscap.ini
>
> [Informix]
> ; Default host for ifx_connect() (doesn't apply in safe mode).
> ifx.default_host =
>
> ; Default user for ifx_connect() (doesn't apply in safe mode).
> ifx.default_user =
>
> ; Default password for ifx_connect() (doesn't apply in safe mode).
> ifx.default_password =
>
> ; Allow or prevent persistent links.
> ifx.allow_persistent = On
>
> ; Maximum number of persistent links. -1 means no limit.
> ifx.max_persistent = -1
>
> ; Maximum number of links (persistent + non-persistent). -1 means no
> limit.
> ifx.max_links = -1
>
> ; If on, select statements return the contents of a text blob instead of
> its id.
> ifx.textasvarchar = 0
>
> ; If on, select statements return the contents of a byte blob instead of
> its id.
> ifx.byteasvarchar = 0
>
> ; Trailing blanks are stripped from fixed-length char columns. May help
> the
> ; life of Informix SE users.
> ifx.charasvarchar = 0
>
> ; If on, the contents of text and byte blobs are dumped to a file
> instead of
> ; keeping them in memory.
> ifx.blobinfile = 0
>
> ; NULL's are returned as empty strings, unless this is set to 1. In
> that case,
> ; NULL's are returned as string 'NULL'.
> ifx.nullformat = 0
>
> [Session]
> ; Handler used to store/retrieve data.
> session.save_handler = files
>
> ; Argument passed to save_handler. In the case of files, this is the
> path
> ; where data files are stored. Note: Windows users have to change this
> ; variable in order to use PHP's session functions.
> ;
> ; As of PHP 4.0.1, you can define the path as:
> ;
> ; session.save_path = "N;/path"
> ;
> ; where N is an integer. Instead of storing all the session files in
> ; /path, what this will do is use subdirectories N-levels deep, and
> ; store the session data in those directories. This is useful if you
> ; or your OS have problems with lots of files in one directory, and is
> ; a more efficient layout for servers that handle lots of sessions.
> ;
> ; NOTE 1: PHP will not create this directory structure automatically.
> ; You can use the script in the ext/session dir for that
> purpose.
> ; NOTE 2: See the section on garbage collection below if you choose to
> ; use subdirectories for session storage
> ;
> ; The file storage module creates files using mode 600 by default.
> ; You can change that by using
> ;
> ; session.save_path = "N;MODE;/path"
> ;
> ; where MODE is the octal representation of the mode. Note that this
> ; does not overwrite the process's umask.
>
> ; Whether to use cookies.
> session.use_cookies = On
>
> ; This option enables administrators to make their users invulnerable to
> ; attacks which involve passing session ids in URLs; defaults to 0.
> ; session.use_only_cookies = 1
>
> ; Name of the session (used as cookie name).
> session.name = PHPSESSID
>
> ; Initialize session on request startup.
> session.auto_start = 0
>
> ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
> ; session.cookie_lifetime = 0
>
> ; The path for which the cookie is valid.
> session.cookie_path = /
>
> ; The domain for which the cookie is valid.
> session.cookie_domain =
>
> ; Whether or not to add the httpOnly flag to the cookie, which makes it
> inaccessible to browser scripting languages such as JavaScript.
> session.cookie_httponly =
>
> ; Handler used to serialize data. php is the standard serializer of
> PHP.
> session.serialize_handler = php
>
> ; Define the probability that the 'garbage collection' process is
> started
> ; on every session initialization.
> ; The probability is calculated by using gc_probability/gc_divisor,
> ; e.g. 1/100 means there is a 1% chance that the GC process starts
> ; on each request.
>
> session.gc_probability = 1
> session.gc_divisor = 1000
>
> ; After this number of seconds, stored data will be seen as 'garbage'
> and
> ; cleaned up by the garbage collection process.
> session.gc_maxlifetime = 1440
>
> ; NOTE: If you are using the
>
> _______________________________________________
> lugos-list mailing list
> lugos-list na lugos.si
> http://liste2.lugos.si/cgi-bin/mailman/listinfo/lugos-list
>
More information about the lugos-list
mailing list