[LUGOS] copy z disk na disk

[Matjaž Repnik]

Evo izpis je sledeči:

Kernel command line: ro root=/dev/hda2 hdc=ide-scsi
ide_setup: hdc=ide-scsi
    ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L040AVVA07-0, ATA DISK drive
hdc: ST38410A, ATA DISK drive
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63, UDMA(33)
 hda: hda1 hda2 hda3
 hdc:end_request: I/O error, dev 16:00 (hdc), sector 0
end_request: I/O error, dev 16:00 (hdc), sector 2
end_request: I/O error, dev 16:00 (hdc), sector 4
end_request: I/O error, dev 16:00 (hdc), sector 6
end_request: I/O error, dev 16:00 (hdc), sector 0
end_request: I/O error, dev 16:00 (hdc), sector 2
end_request: I/O error, dev 16:00 (hdc), sector 4
end_request: I/O error, dev 16:00 (hdc), sector 6



LP

Svejk



ja tako je.
probaj napisati 'dmesg |grep hd' pa skopiraj kar ti izpise v mail, pa se 
bomo potem naprej pogovarjali.

Matjaž Repnik wrote:

>Čaki ne razumem...če mi je jasno je /dev/hdc master na 2IDE. Ja tam pa tudi
>imam disk priključen...
>
>
>M
>
>
>heh. Ne mores meti naenkrat master in slave. Ali eno ali drugo. Ali je 
>disk master ali slave nastavis na samem disku z jumperji (mosticki). 
>/dev/hdc pomeni da imas na disku nastavljen master in disk priklopljen 
>na drugi IDE kanal na plati.
>Se enkrat preveri jumperje na disku in poglej kam je potem speljan 
>kabel. Ali pa si pregledas izpisek 'dmesg' pa je vse reseno. BTW: ali ti 
>BIOS prepozna disk ?
>
>T.
>
>
>
>_______________________________________________
>lugos-list mailing list
>lugos-list at lugos.si
>http://liste2.lugos.si/cgi-bin/mailman/listinfo/lugos-list
>  
>

_______________________________________________
lugos-list mailing list
lugos-list at lugos.si
http://liste2.lugos.si/cgi-bin/mailman/listinfo/lugos-list