[LUGOS] Freeze

[Nejc Skoberne]

Zdravo.

> Jan  8 18:22:13 Odmev kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }

Sem malo pogooglal na tole zgoraj in nekateri pravijo da je IDE kabel
kriv.

root at Odmev:/var/log# hdparm -i /dev/hda

/dev/hda:

 Model=Maxtor 5T040H4, FwRev=TAH71DP0, SerialNo=T4H8KJ0C
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80043264
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 0:  1 2 3 4 5 6

root at Odmev:/var/log# hdparm -i /dev/hdc

/dev/hdc:

 Model=Maxtor 5T040H4, FwRev=TAH71DP0, SerialNo=T4H8KHTC
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80043264
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 0:  1 2 3 4 5 6

Kot se vidi, hda sploh nima udma3, udma4 in udma5 navedenih. A to
pomeni, da je priklopljen s starim IDE kablom (malo-zilnim :)?

-- 
Nejc Skoberne
Grajska 5
SI-5220 Tolmin
E-mail: nejc.skoberne at guest.arnes.si