[LUGOS] Zunanji monitor na prenosniku

[Iztok Saje]

Hoj!

Jaz sem se pretolkel skozi Sony VAIO skatlo.
Najvecje "odkritje" je bilo, da sta notri dva navidezna VGA chipa, kar omogoca
razlicno rezolucijo na LCD ter na VGA izhodu.
(tisti dual v dualhead sem si narobe predstavljal).

Tisti trenutek, ko sem to spoznal, mi je zacel delati TV-out, kinerama ipd.
Sedaj imam za prezentacije X-e narejene tako, da sta zaslona neodvisna.
Kar je za na platno, gre na platno. Na LCD je pa xclock ;-)

Edino cesar ne znam resiti je: ali ima kaj na VGA izhodu, in ali je to TV ali
monitor/projektor ter kaksno rezolucijo zna, ugotavlja BIOS ob bootu.
Se pravi, moram pred prezentacijo pritakniti laptop na monitor in narediti reboot.

Prilagam spodnji del XF86COnfig-4 fileta.
No, ko je enkrat delalo nisem vec kaj dosti saril. Pri Xih sem cisti dumb user.
Aja: RAM na VGA se deli na pol. Saj ga je itak prevec za moje potrebe.
Ko sem forsiral po 8 Mb za vsako kartico je bil rezultat zanimiv ;-)

LP in uspesno konferenco!

Iztok



Renato Lukac wrote:
> Hi,
> 
> na novem prenosniku imam problem s prikazom na zunanjem monitorju, oz. na
> projektorju. Nikakor mi ne uspe spraviti sliko iz masine pod X-i. Zadeve
> je toliko bolj urgentna, ker rabim masino kot demo masino na Linux
> konfernci.
> 
> Prenosnik: Dell LAtitude C840, graficna GeForce4 440 Go
> XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
>         Driver      "nv"
> 
> Iz konzole ni problema, mislim pa da ga muci huda resolucija na tej
> skatli, ki je 1600x1200 in tudi ce definiram v /etc/X11/XF86Config
> resolucijo 1024x768, potem se pozenejo X-i v sredini ekrana v tej pac
> primerno manjsi (na 1600x1200 zavzamejo samo 1024x768, centrirano, okoli
> pa je vse temno). Na projektorju je seveda tema. Obstraja opcija tipk
> Fn+F7 (kao Font), ki potem raztegne to sloko po celem ekranu, vendar
> projektor spet ostane brez pravega signala. Iskal sem ze po WWW glede
> tega, menda so neke opcije za zunanji monitor, vendar mi ni uspelo nic
> resiti.
> 
-------------- next part --------------
Section "Monitor"
	Identifier "LCD"
	VendorName "Unknown"
	ModelName  "Unknown"
EndSection

Section "Monitor"
    Identifier  "CRT"
     VendorName  "Sony" 
#    ModelName   "P1110"
#    HorizSync   30 - 121
#    VertRefresh 48 - 90
     option "DPMS" 
     option "dpms" 
EndSection



Section "Device"
	Identifier "ati0"
	Driver "radeon"
	BoardName "Unknown"
#	VideoRam 8192
        BusID           "PCI:00:12:0"
        Screen      0
        Option "AGPMode" "2"
        Option "NoVBE"
EndSection

Section "Device"
	Identifier "ati1"
	Driver "radeon"
	BoardName "Unknown"
#	VideoRam 8192
        BusID           "PCI:00:12:0"
        Screen      1
        Option "AGPMode" "2"
        Option "nodri"
EndSection


Section "Screen"
	Identifier "Screen0"
	Device "ati0"
	Monitor "LCD"
	DefaultDepth 16
	Subsection "Display"
		Depth 16
#		Modes "1280x600"
		Modes "1280x600" "1152x864" "1024x768" "800x600" "640x480" "320x240"
#		Modes  "640x480"
	EndSubSection
	Subsection "Display"
		Depth 24
		Modes "1280x600" "1152x864" "1024x768" "800x600" "640x480" "320x240"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device "ati1"
	Monitor "CRT"
	DefaultDepth 16
	Subsection "Display"
		Depth 16
#		Modes "1024x768" 
		Modes "1280x1024" "1024x768" "800x600" "640x480" "320x240"
	EndSubSection
	Subsection "Display"
		Depth 24
		Modes "1280x600" "1152x864" "1024x768" "800x600" "640x480" "320x240"
	EndSubSection
EndSection

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" LeftOf "Screen0"

	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "usbmouse" "CorePointer"

EndSection


Section "DRI"
	Mode 0666
EndSection