[LUGOS] tezava s cd-rw IDE-SCSI emulacija

[Mario]

On Sat, 04 Oct 2003 22:03:17 -0100
Jurij Rešc(ic( <jure at gemini.fkkt.uni-lj.si> wrote:

> Sedaj imaš na istem kanalu hitro in poc(asno napravo obešeno na isti kabel.
> Daj CD-RW na IDE-2 kot master (hdc). Mogoc(e bo kaj bolje.
> 
> Jurij


Dal sem CD-RW na IDE-2 master (hdc)
in ko sem dal v lilo.conf append="hdc=ide-scsi"

pri bootanju dobim ta error...


Oct  5 15:37:15 nikita kernel: SiI680: IDE controller at PCI slot 00:0f.0
Oct  5 15:37:15 nikita kernel: PCI: Found IRQ 11 for device 00:0f.0
Oct  5 15:37:15 nikita kernel: SiI680: chipset revision 1
Oct  5 15:37:15 nikita kernel: SiI680: not 100%% native mode: will probe irqs later
Oct  5 15:37:15 nikita kernel: SiI680: BASE CLOCK == 133
Oct  5 15:37:15 nikita kernel:     ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
Oct  5 15:37:15 nikita kernel:     ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Oct  5 15:37:15 nikita kernel: hda: Maxtor 6E040L0, ATA DISK drive
Oct  5 15:37:15 nikita kernel: blk: queue c03c0f80, I/O limit 4095Mb (mask 0xffffffff)
Oct  5 15:37:15 nikita kernel: hdc: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
Oct  5 15:37:15 nikita kernel: hdf: WDC WD400BB-00CAA0, ATA DISK drive
Oct  5 15:37:15 nikita kernel: blk: queue c03c1964, I/O limit 4095Mb (mask 0xffffffff)
Oct  5 15:37:15 nikita kernel: hdg: WDC WD800AB-00CBA1, ATA DISK drive
Oct  5 15:37:15 nikita kernel: blk: queue c03c1c7c, I/O limit 4095Mb (mask 0xffffffff)
Oct  5 15:37:15 nikita kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct  5 15:37:15 nikita kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct  5 15:37:15 nikita kernel: ide2 at 0xf0823080-0xf0823087,0xf082308a on irq 11
Oct  5 15:37:15 nikita kernel: ide3 at 0xf08230c0-0xf08230c7,0xf08230ca on irq 11
Oct  5 15:37:15 nikita kernel: hda: attached ide-disk driver.
Oct  5 15:37:15 nikita kernel: hda: host protected area => 1
Oct  5 15:37:15 nikita kernel: hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(66)
Oct  5 15:37:15 nikita kernel: hdf: attached ide-disk driver.
Oct  5 15:37:15 nikita kernel: hdf: host protected area => 1
Oct  5 15:37:15 nikita kernel: hdf: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
Oct  5 15:37:15 nikita kernel: hdg: attached ide-disk driver.
Oct  5 15:37:15 nikita kernel: hdg: host protected area => 1
Oct  5 15:37:15 nikita kernel: hdg: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
Oct  5 15:37:15 nikita kernel: Partition check:
Oct  5 15:37:15 nikita kernel:  hda: hda1 hda2 < hda5 >
Oct  5 15:37:15 nikita kernel:  hdf: [PTBL] [4865/255/63] hdf1 hdf2
Oct  5 15:37:15 nikita kernel:  hdg: [PTBL] [9729/255/63] hdg1 hdg2 hdg3
Oct  5 15:37:15 nikita kernel: hdc: attached ide-scsi driver.
Oct  5 15:37:15 nikita kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Oct  5 15:37:15 nikita kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00
Oct  5 15:37:15 nikita kernel: hdc: irq timeout: status=0xd0 { Busy }
Oct  5 15:37:15 nikita kernel: hdc: DMA disabled
Oct  5 15:37:15 nikita kernel: hdc: ATAPI reset complete
Oct  5 15:37:15 nikita kernel: hdc: irq timeout: status=0xc0 { Busy }
Oct  5 15:37:15 nikita kernel: hdc: ATAPI reset complete
Oct  5 15:37:15 nikita kernel: hdc: irq timeout: status=0xc0 { Busy }
Oct  5 15:37:15 nikita kernel: scsi0 channel 0 : resetting for second half of retries.
Oct  5 15:37:15 nikita kernel: SCSI bus is being reset for host 0 channel 0.