[LUGOS] apache 1.3 problem s sumniki
Borut Rozman
jedo at zipp.nu
Mon Dec 22 13:22:15 CET 2003
moje mnenje je da najbolje da odstranis oziroma zahashas ti dve vrstici
ker potem bos mel smorn z ljudmi ki majo cp 1250 -- 1252 ipd tako bo dajal
tisti charset ki je default v strani nastavljen!
lp
=?windows-1252?Q?Aljo=9Aa_=8Apanger?= said:
> Zivijo,
> sedaj pa me se zanima, ce dodam v httpd.conf
>
> > Content-Type: text/html; charset=iso-8859-2 <
>
> a bo potem apache prav serviral mojo stran .
>
> Se pravi v srednje evropskem kodnem zapisu.
>
> To je izpis iz httpd.conf
>
> >>>
> # Default charset to iso-8859-1 (ttp://www.apache.org/info/css-security/).
>
> AddDefaultCharset on
>
> <<<
>
> Hvala za odgovore
>
> LP
>
> Al
>
> P.S.
> zraven prilagam se cel httpd.conf
> Miha Remec wrote:
>
>>> Tvoj spletni streznik je nastavljen (glej httpd.conf), da poslje HTTP
>>> odgovor v kodni strani iso-8859-1:
>>> Content-Type: text/html; charset=iso-8859-1
>>>
>>> Ti sicer imas v dokumentu kasneje HTML znacko za iso-8859-2:
>>> <meta http-equiv="Content-Type" content="text/html;
>>> charset=iso-8859-2" />
>>>
>>> Po HTML 4 standardu (http://www.w3.org/TR/REC-html40/charset.html,
>>> tocka
>>> 5.2.2 Specifying the character encoding) so dolocene naslednje
>>> prioritete:
>>>
>>> "To sum up, conforming user agents must observe the following
>>> priorities
>>> when determining a document's character encoding (from highest
>>> priority to
>>> lowest):
>>> 1. An HTTP "charset" parameter in a "Content-Type" field.
>>> 2. A META declaration with "http-equiv" set to "Content-Type" and a
>>> value
>>> set for "charset".
>>> 3. The charset attribute set on an element that designates an external
>>> resource."
>>>
>>> Rekel bi, da en program uposteva HTML standard, drugi pa ne.
>>>
>>> --
>>> lp, Miha-R
>>>
>>>
>>
>
> ##
> ## httpd.conf -- Apache HTTP server configuration file
> ##
>
> #
> # Based upon the NCSA server configuration files originally by Rob McCool.
> #
> # This is the main Apache server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://www.apache.org/docs/> for detailed information about
> # the directives.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # After this file is processed, the server will look for and process
> # /etc/apache/srm.conf and then /etc/apache/access.conf
> # unless you have overridden these with ResourceConfig and/or
> # AccessConfig directives here.
> #
> # The configuration directives are grouped into three basic sections:
> # 1. Directives that control the operation of the Apache server process
> as a
> # whole (the 'global environment').
> # 2. Directives that define the parameters of the 'main' or 'default'
> server,
> # which responds to requests that aren't handled by a virtual host.
> # These directives also provide default values for the settings
> # of all virtual hosts.
> # 3. Settings for virtual hosts, which allow Web requests to be sent to
> # different IP addresses or hostnames and have them handled by the
> # same Apache server process.
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server's control files begin with "/" (or "drive:/" for Win32),
> the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "/usr/local/apache" will be interpreted by the
> # server as "/usr/local/apache/logs/foo.log".
> #
>
> ### Section 1: Global Environment
> #
> # The directives in this section affect the overall operation of Apache,
> # such as the number of concurrent requests it can handle or where it
> # can find its configuration files.
> #
>
> #
> # ServerType is either inetd, or standalone. Inetd mode is only supported
> on
> # Unix platforms.
> #
> ServerType standalone
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # NOTE! If you intend to place this on an NFS (or otherwise network)
> # mounted filesystem then please read the LockFile documentation
> # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
> # you will save yourself a lot of trouble.
> #
> # Do NOT add a slash at the end of the directory path.
> #
> ServerRoot /etc/apache
>
> #
> # The LockFile directive sets the path to the lockfile used when Apache
> # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
> # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
> # its default value. The main reason for changing it is if the logs
> # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
> # DISK. The PID of the main server process is automatically appended to
> # the filename.
> #
> LockFile /var/lock/apache.lock
>
> #
> # PidFile: The file in which the server should record its process
> # identification number when it starts.
> #
> PidFile /var/run/apache.pid
>
> #
> # ScoreBoardFile: File used to store internal server process information.
> # Not all architectures require this. But if yours does (you'll know
> because
> # this file will be created when you run Apache) then you *must* ensure
> that
> # no two invocations of Apache share the same scoreboard file.
> #
> ScoreBoardFile /var/run/apache.scoreboard
>
> #
> # In the standard configuration, the server will process this file,
> # srm.conf, and access.conf in that order. The latter two files are
> # now distributed empty, as it is recommended that all directives
> # be kept in a single file for simplicity. The commented-out values
> # below are the built-in defaults. You can have the server ignore
> # these files altogether by using "/dev/null" (for Unix) or
> # "nul" (for Win32) for the arguments to the directives.
> #
> #ResourceConfig /etc/apache/srm.conf
> #AccessConfig /etc/apache/access.conf
>
> #
> # Timeout: The number of seconds before receives and sends time out.
> #
> Timeout 300
>
> #
> # KeepAlive: Whether or not to allow persistent connections (more than
> # one request per connection). Set to "Off" to deactivate.
> #
> KeepAlive On
>
> #
> # MaxKeepAliveRequests: The maximum number of requests to allow
> # during a persistent connection. Set to 0 to allow an unlimited amount.
> # We recommend you leave this number high, for maximum performance.
> #
> MaxKeepAliveRequests 100
>
> #
> # KeepAliveTimeout: Number of seconds to wait for the next request from
> the
> # same client on the same connection.
> #
> KeepAliveTimeout 15
>
> #
> # Server-pool size regulation. Rather than making you guess how many
> # server processes you need, Apache dynamically adapts to the load it
> # sees --- that is, it tries to maintain enough server processes to
> # handle the current load, plus a few spare servers to handle transient
> # load spikes (e.g., multiple simultaneous requests from a single
> # Netscape browser).
> #
> # It does this by periodically checking how many servers are waiting
> # for a request. If there are fewer than MinSpareServers, it creates
> # a new spare. If there are more than MaxSpareServers, some of the
> # spares die off. The default values are probably OK for most sites.
> #
> MinSpareServers 5
> MaxSpareServers 20
>
> #
> # Number of servers to start initially --- should be a reasonable ballpark
> # figure.
> #
> StartServers 5
>
> #
> # Limit on total number of servers running, i.e., limit on the number
> # of clients who can simultaneously connect --- if this limit is ever
> # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
> # It is intended mainly as a brake to keep a runaway server from taking
> # the system with it as it spirals down...
> #
> MaxClients 150
>
> #
> # MaxRequestsPerChild: the number of requests each child process is
> # allowed to process before the child dies. The child will exit so
> # as to avoid problems after prolonged use when Apache (and maybe the
> # libraries it uses) leak memory or other resources. On most systems,
> this
> # isn't really needed, but a few (such as Solaris) do have notable leaks
> # in the libraries. For these platforms, set to something like 10000
> # or so; a setting of 0 means unlimited.
> #
> # NOTE: This value does not include keepalive requests after the initial
> # request per connection. For example, if a child process handles
> # an initial request and 10 subsequent "keptalive" requests, it
> # would only count as 1 request towards this limit.
> #
> MaxRequestsPerChild 100
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, in addition to the default. See also the <VirtualHost>
> # directive.
> #
> #Listen 3000
> #Listen 12.34.56.78:80
>
> #
> # BindAddress: You can support virtual hosts with this option. This
> directive
> # is used to tell the server which IP address to listen to. It can either
> # contain "*", an IP address, or a fully qualified Internet domain name.
> # See also the <VirtualHost> and Listen directives.
> #
> #BindAddress *
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a DSO
> you
> # have to place corresponding `LoadModule' lines at this location so the
> # directives contained in it are actually available _before_ they are
> used.
> # Please read the file README.DSO in the Apache 1.3 distribution for more
> # details about the DSO mechanism and run `apache -l' for the list of
> already
> # built-in (statically linked and thus always available) modules in your
> apache
> # binary.
> #
> # Please keep this LoadModule: line here, it is needed for installation.
> # LoadModule vhost_alias_module /usr/lib/apache/1.3/mod_vhost_alias.so
> # LoadModule env_module /usr/lib/apache/1.3/mod_env.so
> LoadModule config_log_module /usr/lib/apache/1.3/mod_log_config.so
> # LoadModule mime_magic_module /usr/lib/apache/1.3/mod_mime_magic.so
> LoadModule mime_module /usr/lib/apache/1.3/mod_mime.so
> LoadModule negotiation_module /usr/lib/apache/1.3/mod_negotiation.so
> LoadModule status_module /usr/lib/apache/1.3/mod_status.so
> # LoadModule info_module /usr/lib/apache/1.3/mod_info.so
> # LoadModule includes_module /usr/lib/apache/1.3/mod_include.so
> LoadModule autoindex_module /usr/lib/apache/1.3/mod_autoindex.so
> LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so
> LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so
> # LoadModule asis_module /usr/lib/apache/1.3/mod_asis.so
> # LoadModule imap_module /usr/lib/apache/1.3/mod_imap.so
> # LoadModule action_module /usr/lib/apache/1.3/mod_actions.so
> # LoadModule speling_module /usr/lib/apache/1.3/mod_speling.so
> LoadModule userdir_module /usr/lib/apache/1.3/mod_userdir.so
> LoadModule alias_module /usr/lib/apache/1.3/mod_alias.so
> LoadModule rewrite_module /usr/lib/apache/1.3/mod_rewrite.so
> LoadModule access_module /usr/lib/apache/1.3/mod_access.so
> LoadModule auth_module /usr/lib/apache/1.3/mod_auth.so
> # LoadModule anon_auth_module /usr/lib/apache/1.3/mod_auth_anon.so
> # LoadModule dbm_auth_module /usr/lib/apache/1.3/mod_auth_dbm.so
> # LoadModule db_auth_module /usr/lib/apache/1.3/mod_auth_db.so
> # LoadModule proxy_module /usr/lib/apache/1.3/libproxy.so
> # LoadModule digest_module /usr/lib/apache/1.3/mod_digest.so
> # LoadModule cern_meta_module /usr/lib/apache/1.3/mod_cern_meta.so
> LoadModule expires_module /usr/lib/apache/1.3/mod_expires.so
> # LoadModule headers_module /usr/lib/apache/1.3/mod_headers.so
> # LoadModule usertrack_module /usr/lib/apache/1.3/mod_usertrack.so
> LoadModule unique_id_module /usr/lib/apache/1.3/mod_unique_id.so
> LoadModule setenvif_module /usr/lib/apache/1.3/mod_setenvif.so
> # LoadModule sys_auth_module /usr/lib/apache/1.3/mod_auth_sys.so
> LoadModule ssl_module /usr/lib/apache/1.3/mod_ssl.so
> # LoadModule throttle_module /usr/lib/apache/1.3/mod_throttle.so
> # LoadModule allowdev_module /usr/lib/apache/1.3/mod_allowdev.so
> # LoadModule eaccess_module /usr/lib/apache/1.3/mod_eaccess.so
> LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
> # LoadModule roaming_module /usr/lib/apache/1.3/mod_roaming.so
>
> #
> # ExtendedStatus: controls whether Apache will generate "full" status
> # information (ExtendedStatus On) or just basic information
> (ExtendedStatus
> # Off) when the "server-status" handler is called. The default is Off.
> #
> ExtendedStatus On
>
> ### Section 2: 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # If your ServerType directive (set earlier in the 'Global Environment'
> # section) is set to "inetd", the next few directives don't have any
> # effect since their settings are defined by the inetd configuration.
> # Skip ahead to the ServerAdmin directive.
> #
>
> #
> # Port: The port to which the standalone server listens. For
> # ports < 1023, you will need apache to be run as root initially.
> #
> Port 80
>
> #
> # If you wish apache to run as a different user or group, you must run
> # apacheas root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run apache as.
> # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
> # . On HPUX you may not be able to use shared memory as nobody, and the
> # suggested workaround is to create a user www and use that user.
> # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
> # when the value of (unsigned)Group is above 60000;
> # don't use Group nobody on these systems!
> #
> User www-data
> Group www-data
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents.
> #
> ServerAdmin webmaster at Knoppix
>
> #
> # ServerName: allows you to set a host name which is sent back to clients
> for
> # your server if it's different than the one the program would get (i.e.,
> use
> # "www" instead of the host's real name).
> #
> # Note: You cannot just invent host names and hope they work. The name you
> # define here must be a valid DNS name for your host. If you don't
> understand
> # this, ask your network administrator.
> # If your host doesn't have a registered DNS name, enter its IP address
> here.
> # You will have to access it by its address (e.g., http://123.45.67.89/)
> # anyway, and this will make redirections work in a sensible way.
> #
> #ServerName new.host.name
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot /var/www/most
>
> #
> # Each directory to which Apache has access, can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # permissions.
> #
> <Directory />
> Options SymLinksIfOwnerMatch
> AllowOverride None
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> <Directory /var/www/most>
>
> #
> # This may also be "None", "All", or any combination of "Indexes",
> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> Options Indexes Includes FollowSymLinks MultiViews
>
> #
> # This controls which options the .htaccess files in directories can
> # override. Can also be "All", or any combination of "Options",
> "FileInfo",
> # "AuthConfig", and "Limit"
> #
> AllowOverride None
>
> #
> # Controls who can get stuff from this server.
> #
> Order allow,deny
> Allow from all
> </Directory>
>
> #
> # UserDir: The name of the directory which is appended onto a user's home
> # directory if a ~user request is received.
> #
> <IfModule mod_userdir.c>
> UserDir public_html
> </IfModule>
>
> #
> # Control access to UserDir directories. The following is an example
> # for a site where these directories are restricted to read-only.
> #
> <Directory /home/*/public_html>
> AllowOverride FileInfo AuthConfig Limit
> Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> <Limit GET POST OPTIONS PROPFIND>
> Order allow,deny
> Allow from all
> </Limit>
> <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
> Order deny,allow
> Deny from all
> </Limit>
> </Directory>
>
> #
> # DirectoryIndex: Name of the file or files to use as a pre-written HTML
> # directory index. Separate multiple entries with spaces.
> #
> <IfModule mod_dir.c>
> DirectoryIndex index.html index.htm index.shtml index.cgi
> </IfModule>
>
> #
> # AccessFileName: The name of the file to look for in each directory
> # for access control information.
> #
> AccessFileName .htaccess
>
> #
> # The following lines prevent .htaccess files from being viewed by
> # Web clients. Since .htaccess files often contain authorization
> # information, access is disallowed for security reasons. Comment
> # these lines out if you want Web visitors to see the contents of
> # .htaccess files. If you change the AccessFileName directive above,
> # be sure to make the corresponding changes here.
> #
> # Also, folks tend to use names such as .htpasswd for password
> # files, so this will protect those as well.
> #
> <Files ~ "^\.ht">
> Order allow,deny
> Deny from all
> </Files>
>
> #
> # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with
> each
> # document that was negotiated on the basis of content. This asks proxy
> # servers not to cache the document. Uncommenting the following line
> disables
> # this behavior, and proxies will be allowed to cache the documents.
> #
> #CacheNegotiatedDocs
>
> #
> # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
> # Apache needs to construct a self-referencing URL (a URL that refers back
> # to the server the response is coming from) it will use ServerName and
> # Port to form a "canonical" name. With this setting off, Apache will
> # use the hostname:port that the client supplied, when possible. This
> # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
> #
> UseCanonicalName On
>
> #
> # TypesConfig describes where the mime.types file (or equivalent) is
> # to be found.
> #
> TypesConfig /etc/mime.types
>
> #
> # DefaultType is the default MIME type the server will use for a document
> # if it cannot otherwise determine one, such as from filename extensions.
> # If your server contains mostly text or HTML documents, "text/plain" is
> # a good value. If most of your content is binary, such as applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> #
> # The mod_mime_magic module allows the server to use various hints from
> the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> # mod_mime_magic is not part of the default server (you have to add
> # it yourself with a LoadModule [see the DSO paragraph in the 'Global
> # Environment' section], or recompile the server and include
> mod_mime_magic
> # as part of the configuration), so it's enclosed in an <IfModule>
> container.
> # This means that the MIMEMagicFile directive will only be processed if
> the
> # module is part of the server.
> #
> <IfModule mod_mime_magic.c>
> MIMEMagicFile share/magic
> </IfModule>
>
> #
> # HostnameLookups: Log the names of clients or just their IP addresses
> # e.g., www.apache.org (on) or 204.62.129.132 (off).
> # The default is off because it'd be overall better for the net if people
> # had to knowingly turn this feature on, since enabling it means that
> # each client request will result in AT LEAST one lookup request to the
> # nameserver.
> #
> HostnameLookups Off
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog /var/log/apache/error.log
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %T
> %v" full
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %P
> %T" debug
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
> combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
> LogFormat "%{Referer}i -> %U" referer
> LogFormat "%{User-agent}i" agent
>
> #
> # The location and format of the access logfile (Common Logfile Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> #CustomLog /var/log/apache/access.log common
>
> #
> # If you would like to have agent and referer logfiles, uncomment the
> # following directives.
> #
> #CustomLog /var/log/apache/referer.log referer
> #CustomLog /var/log/apache/agent.log agent
>
> #
> # If you prefer a single logfile with access, agent, and referer
> information
> # (Combined Logfile Format) you can use the following directive.
> #
> CustomLog /var/log/apache/access.log combined
>
> #
> # Optionally add a line containing the server version and virtual host
> # name to server-generated pages (error documents, FTP directory listings,
> # mod_status and mod_info output etc., but not CGI generated documents).
> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> # Set to one of: On | Off | EMail
> #
> ServerSignature On
>
> #
> # Aliases: Add here as many aliases as you need (with no limit). The
> format is
> # Alias fakename realname
> #
> # Note that if you include a trailing / on fakename then the server will
> # require it to be present in the URL. So "/icons" isn't aliased in this
> # example, only "/icons/"..
> #
>
> Alias /icons/ /usr/share/apache/icons/
>
> <Directory /usr/share/apache/icons>
> Options Indexes MultiViews
> AllowOverride None
> Order allow,deny
> Allow from all
> </Directory>
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the realname directory are treated as applications and
> # run by the server when requested rather than as documents sent to the
> client.
> # The same rules about trailing "/" apply to ScriptAlias directives as to
> # Alias.
> #
> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
>
> #
> # "/usr/lib/cgi-bin" could be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory /usr/lib/cgi-bin/>
> AllowOverride None
> Options ExecCGI
> Order allow,deny
> Allow from all
> </Directory>
>
> #
> # Redirect allows you to tell clients about documents which used to exist
> in
> # your server's namespace, but do not anymore. This allows you to tell the
> # clients where to look for the relocated document.
> # Format: Redirect old-URI new-URL
> #
>
> #
> # Directives controlling the display of server-generated directory
> listings.
> #
>
> <IfModule mod_autoindex.c>
>
> #
> # FancyIndexing: whether you want fancy directory indexing or standard
> #
> IndexOptions FancyIndexing NameWidth=*
>
> #
> # AddIcon* directives tell the server which icon to show for different
> # files or filename extensions. These are only displayed for
> # FancyIndexed directories.
> #
> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>
> AddIconByType (TXT,/icons/text.gif) text/*
> AddIconByType (IMG,/icons/image2.gif) image/*
> AddIconByType (SND,/icons/sound2.gif) audio/*
> AddIconByType (VID,/icons/movie.gif) video/*
>
> AddIcon /icons/binary.gif .bin .exe
> AddIcon /icons/binhex.gif .hqx
> AddIcon /icons/tar.gif .tar
> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> AddIcon /icons/a.gif .ps .ai .eps
> AddIcon /icons/layout.gif .html .shtml .htm .pdf
> AddIcon /icons/text.gif .txt
> AddIcon /icons/c.gif .c
> AddIcon /icons/p.gif .pl .py
> AddIcon /icons/f.gif .for
> AddIcon /icons/dvi.gif .dvi
> AddIcon /icons/uuencoded.gif .uu
> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> AddIcon /icons/tex.gif .tex
> AddIcon /icons/bomb.gif core
>
> AddIcon /icons/back.gif ..
> AddIcon /icons/hand.right.gif README
> AddIcon /icons/folder.gif ^^DIRECTORY^^
> AddIcon /icons/blank.gif ^^BLANKICON^^
>
> #
> # DefaultIcon: which icon to show for files which do not have an icon
> # explicitly set.
> #
> DefaultIcon /icons/unknown.gif
>
> #
> # AddDescription: allows you to place a short description after a file
> in
> # server-generated indexes. These are only displayed for FancyIndexed
> # directories.
> # Format: AddDescription "description" filename
> #
> #AddDescription "GZIP compressed document" .gz
> #AddDescription "tar archive" .tar
> #AddDescription "GZIP compressed tar archive" .tgz
>
> #
> # ReadmeName: the name of the README file the server will look for by
> # default, and append to directory listings.
> #
> # HeaderName: the name of a file which should be prepended to
> # directory indexes.
> #
> # The server will first look for name.html and include it if found.
> # If name.html doesn't exist, the server will then look for name.txt
> # and include it as plaintext if found.
> #
> ReadmeName README
> HeaderName HEADER
>
> #
> # IndexIgnore: a set of filenames which directory indexing should
> ignore
> # and not include in the listing. Shell-style wildcarding is
> permitted.
> #
> IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
>
> </IfModule>
>
> #
> # Document types.
> #
> <IfModule mod_mime.c>
>
> # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
> # uncompress information on the fly. Note: Not all browsers support
> # this. Despite the name similarity, the following Add* directives
> # have nothing to do with the FancyIndexing customization
> # directives above.
>
> AddEncoding x-compress Z
> AddEncoding x-gzip gz tgz
>
> #
> # AddLanguage: allows you to specify the language of a document. You
> can
> # then use content negotiation to give a browser a file in a language
> # it can understand.
> #
> # Note 1: The suffix does not have to be the same as the language
> # keyword --- those with documents in Polish (whose net-standard
> # language code is pl) may wish to use "AddLanguage pl .po" to
> # avoid the ambiguity with the common suffix for perl scripts.
> #
> # Note 2: The example entries below illustrate that in quite
> # some cases the two character 'Language' abbriviation is not
> # identical to the two character 'Country' code for its country,
> # E.g. 'Danmark/dk' versus 'Danish/da'.
> #
> # Note 3: In the case of 'ltz' we violate the RFC by using a three
> char
> # specifier. But there is 'work in progress' to fix this and get
> # the reference data for rfc1766 cleaned up.
> #
> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
> # French (fr) - German (de) - Greek-Modern (el)
> # Italian (it) - Portugese (pt) - Luxembourgeois* (ltz)
> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
> #
> AddLanguage da .dk
> AddLanguage nl .nl
> AddLanguage en .en
> AddLanguage et .ee
> AddLanguage fr .fr
> AddLanguage de .de
> AddLanguage el .el
> AddLanguage it .it
> AddLanguage ja .ja
> AddCharset ISO-2022-JP .jis
> AddLanguage pl .po
> AddCharset ISO-8859-2 .iso-pl
> AddLanguage pt .pt
> AddLanguage pt-br .pt-br
> AddLanguage ltz .lu
> AddLanguage ca .ca
> AddLanguage es .es
> AddLanguage sv .se
> AddLanguage cz .cz
>
> # LanguagePriority: allows you to give precedence to some languages
> # in case of a tie during content negotiation.
> #
> # Just list the languages in decreasing order of preference. We have
> # more or less alphabetized them here. You probably want to change
> # this.
> #
> <IfModule mod_negotiation.c>
> LanguagePriority en da nl et fr de el it ja pl pt pt-br ltz ca es
> sv
> </IfModule>
>
> #
> # AddType allows you to tweak mime.types without actually editing
> # it, or to make certain files to be certain types.
> #
> # For example, the PHP 3.x module (not part of the Apache
> # distribution - see http://www.php.net) will typically use:
> #
> #AddType application/x-httpd-php3 .php3
> #AddType application/x-httpd-php3-source .phps
> #
> # And for PHP 4.x, use:
> #
> AddType application/x-httpd-php .php .php3 .php4
> AddType application/x-httpd-php-source .phps
>
> AddType application/x-tar .tgz
> AddType image/bmp .bmp
>
> # hdml
> AddType text/x-hdml .hdml
>
> #
> # AddHandler allows you to map certain file extensions to "handlers",
> # actions unrelated to filetype. These can be either built into
> # the server or added with the Action command (see below).
> #
> # If you want to use server side includes, or CGI outside
> # ScriptAliased directories, uncomment the following lines.
> #
> # To use CGI scripts:
> #
> #AddHandler cgi-script .cgi .sh .pl
>
> #
> # To use server-parsed HTML files
> #
> #AddType text/html .shtml
> #AddHandler server-parsed .shtml
>
> #
> # Uncomment the following line to enable Apache's send-asis HTTP
> # file feature.
> #
> #AddHandler send-as-is asis
>
> #
> # If you wish to use server-parsed imagemap files, use
> #
> #AddHandler imap-file map
>
> #
> # To enable type maps, you might want to use
> #
> #AddHandler type-map var
>
> </IfModule>
> # End of document types.
>
> # Default charset to iso-8859-1 (ttp://www.apache.org/info/css-security/).
>
> AddDefaultCharset on
>
> #
> # Action: lets you define media types that will execute a script whenever
> # a matching file is called. This eliminates the need for repeated URL
> # pathnames for oft-used CGI file processors.
> # Format: Action media/type /cgi-script/location
> # Format: Action handler-name /cgi-script/location
> #
>
> #
> # MetaDir: specifies the name of the directory in which Apache can find
> # meta information files. These files contain additional HTTP headers
> # to include when sending the document
> #
> #MetaDir .web
>
> #
> # MetaSuffix: specifies the file name suffix for the file containing the
> # meta information.
> #
> #MetaSuffix .meta
>
> #
> # Customizable error response (Apache style)
> # these come in three flavors
> #
> # 1) plain text
> #ErrorDocument 500 "The server made a boo boo.
> # n.b. the (") marks it as text, it does not get output
> #
> # 2) local redirects
> #ErrorDocument 404 /missing.html
> # to redirect to local URL /missing.html
> #ErrorDocument 404 /cgi-bin/missing_handler.pl
> # N.B.: You can redirect to a script or a document using
> server-side-includes.
> #
> # 3) external redirects
> #ErrorDocument 402 http://some.other_server.com/subscription_info.html
> # N.B.: Many of the environment variables associated with the original
> # request will *not* be available to such a script.
>
> <IfModule mod_setenvif.c>
> #
> # The following directives modify normal HTTP response behavior.
> # The first directive disables keepalive for Netscape 2.x and browsers
> that
> # spoof it. There are known problems with these browser
> implementations.
> # The second directive is for Microsoft Internet Explorer 4.0b2
> # which has a broken HTTP/1.1 implementation and does not properly
> # support keepalive when it is used on 301 or 302 (redirect)
> responses.
> #
> BrowserMatch "Mozilla/2" nokeepalive
> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
> force-response-1.0
>
> #
> # The following directive disables HTTP/1.1 responses to browsers
> which
> # are in violation of the HTTP/1.0 spec by not being able to grok a
> # basic 1.1 response.
> #
> BrowserMatch "RealPlayer 4\.0" force-response-1.0
> BrowserMatch "Java/1\.0" force-response-1.0
> BrowserMatch "JDK/1\.0" force-response-1.0
> </IfModule>
>
>
> # If the perl module is installed, this will be enabled.
> <IfModule mod_perl.c>
> Alias /perl/ /var/www/perl/
> <Location /perl>
> SetHandler perl-script
> PerlHandler Apache::Registry
> Options +ExecCGI
> </Location>
> </IfModule>
>
> #
> # Allow http put (such as Netscape Gold's publish feature)
> # Use htpasswd to generate /etc/apache/passwd.
> # You must unremark these two lines at the top of this file as well:
> #LoadModule put_module modules/mod_put.so
> #
> #Alias /upload /tmp
> #<Location /upload>
> # EnablePut On
> # AuthType Basic
> # AuthName Temporary
> # AuthUserFile /etc/apache/passwd
> # EnableDelete Off
> # umask 007
> # <Limit PUT>
> # require valid-user
> # </Limit>
> #</Location>
>
> #
> # Allow server status reports, with the URL of
> http://servername/server-status
> # Change the ".your_domain.com" to match your domain to enable.
> #
> #<Location /server-status>
> # SetHandler server-status
> # Order deny,allow
> # Deny from all
> # Allow from .your_domain.com
> #</Location>
>
> #
> # Allow remote server configuration reports, with the URL of
> # http://servername/server-info (requires that mod_info.c be loaded).
> # Change the ".your_domain.com" to match your domain to enable.
> #
> #<Location /server-info>
> # SetHandler server-info
> # Order deny,allow
> # Deny from all
> # Allow from .your_domain.com
> #</Location>
>
> # Allow access to local system documentation from localhost.
> # (Debian Policy assumes /usr/share/doc is "/doc/", at least from the
> localhost.)
> Alias /doc/ /usr/share/doc/
>
> <Location /doc>
> order deny,allow
> deny from all
> allow from 127.0.0.0/255.0.0.0
> Options Indexes FollowSymLinks
> </Location>
>
> #
> # There have been reports of people trying to abuse an old bug from
> pre-1.1
> # days. This bug involved a CGI script distributed as a part of Apache.
> # By uncommenting these lines you can redirect these attacks to a logging
> # script on phf.apache.org. Or, you can record them yourself, using the
> script
> # support/phf_abuse_log.cgi.
> #
> #<Location /cgi-bin/phf*>
> # Deny from all
> # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
> #</Location>
>
> <IfModule mod_proxy.c>
> #
> # Proxy Server directives. Uncomment the following lines to
> # enable the proxy server:
> #
> #<IfModule mod_proxy.c>
> #ProxyRequests On
> #
> #<Directory proxy:*>
> # Order deny,allow
> # Deny from all
> # Allow from .your_domain.com
> #</Directory>
> </IfModule>
>
> #
> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> # ("Full" adds the server version; "Block" removes all outgoing Via:
> headers)
> # Set to one of: Off | On | Full | Block
> #
> #ProxyVia On
>
> #
> # To enable the cache as well, edit and uncomment the following lines:
> # (no cacheing without CacheRoot)
> #
> #CacheRoot "/var/cache/apache"
> #CacheSize 5
> #CacheGcInterval 4
> #CacheMaxExpire 24
> #CacheLastModifiedFactor 0.1
> #CacheDefaultExpire 1
> #NoCache a_domain.com another_domain.edu joes.garage_sale.com
>
> #</IfModule>
> # End of proxy directives.
>
> ### Section 3: Virtual Hosts
> #
> # VirtualHost: If you want to maintain multiple domains/hostnames on your
> # machine you can setup VirtualHost containers for them.
> # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
> # for further details before you try to setup virtual hosts.
> # You may use the command line option '-S' to verify your virtual host
> # configuration.
>
> #
> # If you want to use name-based virtual hosts you need to define at
> # least one IP address (and port number) for them.
> #
> #NameVirtualHost 12.34.56.78:80
> #NameVirtualHost 12.34.56.78
>
> #
> # VirtualHost example:
> # Almost any Apache directive may go into a VirtualHost container.
> #
> #<VirtualHost ip.address.of.host.some_domain.com>
> # ServerAdmin webmaster at host.some_domain.com
> # DocumentRoot /www/docs/host.some_domain.com
> # ServerName host.some_domain.com
> # ErrorLog logs/host.some_domain.com-error.log
> # CustomLog logs/host.some_domain.com-access.log common
> #</VirtualHost>
>
> #<VirtualHost _default_:*>
> #</VirtualHost>
>
---------------------------
Borut Rozman
Zipp design
http://www.zipp.nu
More information about the lugos-list
mailing list