[LUGOS] nvidia + tv out

[Marko Preslenkov]

tole so sicer nastavitve za geforce2 mx400, vse nastavitve pa so iz
XF86Config-4 na debianu. pogoj, da zadeve zacnejo delat je, da imas
nvidia binaryje za xe (ki jih moras pri debianu sam skompajlirat, pri
susetu 8 pa so ze vkljuceni v distribucijo).

-----
Section "Device"
        Identifier      "NV AGP TwinView"
        VendorName      "inno3D"
        Driver          "nvidia"

        # update this with the PCI id of your card.  Consult the output
        # of the 'lspci' command.
        BusID           "PCI:1:0:0"

        # sample twinview setup
        Option "TwinView"

        # be sure to replace the HorizSync and VertRefresh with correct
values
        # for your monitor!
        Option          "SecondMonitorHorizSync"        "30-50"
        Option          "SecondMonitorVertRefresh"      "60"
        Option          "TwinViewOrientation"           "Clone"
        Option          "MetaModes"                     "1152x864,NULL;
1024x768,NULL; 800x600,800x600; 640x480,640x480"
        Option          "ConnectedMonitor"              "crt,tv"
EndSection

Section "Monitor"
        Identifier      "Hansol Monitor"
        VendorName      "Hansol"
        ModelName       "710A"
        HorizSync       30-72
        VertRefresh     47-160
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "NV AGP TwinView"
        Monitor         "Hansol Monitor"
        DefaultColorDepth       24
        SubSection "Display"
                Depth           1
                Modes           "1152x864" "1024x768" "800x600"
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1152x864" "1024x768" "800x600"
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1152x864" "1024x768" "800x600"
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1152x864" "1024x768" "800x600"
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1152x864" "1024x768" "800x600"
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1152x864" "1024x768" "800x600"
"640x480"
        EndSubSection
EndSection
-----

navodila, dokumentacijo ter driverje najdes na
http://www.nvidia.com/view.asp?IO=linux_display_1.0-3123

lp
marko 

On Wed, 2002-10-16 at 09:04, Mitja Zabukovec wrote:
> živjo,
> 
> imam nvidia tnt2 ultra grafično kartico s tv out izhodom in
> se trudim usposobiti TV out pa mi uspe dobiti samo
> črno belo sliko.
> Parameter TVStandard v XF86Config imam nastavljen
> na PAL-B, kar naj bi rešilo problem, pa ga ne.
> Potem imam še parameter TVOutFormat nastavljen na
> COMPOSITE, ker imam tak kabel.
> Za ta parameter mi v X logu piše, da je unused.
> 
> V čem bi lahko bil problem ?
> 
> v windowsih zadeva deluje (s PAL-B in avtomatsko
> detekcijo izhoda).
> 
> driver imam od nvidie, v1.0-1251, X je verzije 4.0.2
> 
> lp,
> MItja