ISDN TA mgetty

[Stane Erzar]

Uporabljam zunanji ISDN TA Zyxel Omni net in mgetty za dialin.
Stvar deluje, ko pa klicajoci vzpostavi povezavo z drugega ISDN TA in 
forsira PPP, pa zadeva obvisi pri getlogname(AUTO_PPP).

Vsi drugu protokoli (V120, V110, X75) delujejo normalno.

Kaksne ideje ??

02/11 12:09:46 aa1  wfr: waiting for ``RING''
02/11 12:09:46 aa1   got: [0d][0a]RING[0d]
02/11 12:09:46 aa1    CND: RING
02/11 12:09:46 aa1   wfr: rc=0, drn=0
02/11 12:09:46 aa1    CND: check no: 'none'
02/11 12:09:46 aa1  send: ATA[0d]
02/11 12:09:46 aa1  waiting for ``CONNECT''
02/11 12:09:46 aa1   got: ATA[0d]
02/11 12:09:46 aa1    CND: OKATA[0d][0a]CONNECT ** found **
02/11 12:09:46 aa1  send:
02/11 12:09:46 aa1  waiting for ``_''
02/11 12:09:46 aa1   got:  115200/PPP 64000/NONE[0d]
02/11 12:09:46 aa1    CND: CONNECT 115200/PPP 64000/NONE
02/11 12:09:46 aa1    CND: found: 115200/PPP 64000/NONE ** found **
02/11 12:09:46 aa1  autobauding: switch to 115200 bps
02/11 12:09:46 aa1   tss: set speed to 115200 (341000)
02/11 12:09:46 aa1   waiting for line to clear (VTIME), read: [0a]
02/11 12:09:46 aa1   utmp + wtmp entry made
02/11 12:09:47 aa1   tio_set_flow_control( HARD )
02/11 12:09:47 aa1   print welcome banner (/etc/issue)
02/11 12:09:47 aa1   getlogname (AUTO_PPP), read:[0d]
02/11 12:10:23 aa1   input finished with '\r', setting ICRNL ONLCR
02/11 12:10:23 aa1   tio_set_flow_control( HARD )
02/11 12:10:23 aa1   print welcome banner (/etc/issue)
02/11 12:10:23 aa1   getlogname (AUTO_PPP), read:[0a]
02/11 12:10:23 aa1   tio_set_flow_control( HARD )
02/11 12:10:23 aa1   print welcome banner (/etc/issue)
02/11 12:10:23 aa1   getlogname (AUTO_PPP), read:NO CARRIER[0d]
02/11 12:10:23 ##### failed dev=cuaa1, pid=25945, got modem error 'NO 
CARRIER'



LP
Stane Erzar