PCI to PCMICA kartica - wireless težave

[Marjan Savli]

Ve kdo pomagati?

Imam mašino Compaq Deskpro 2000   Pentium 200 usb z najnovejšim biosom iz
     98 leta :), v katero sem dal:
- 3c509b mrežno kartico (eth0) 300/irq:10 in dodal še 
- PCI to PCMCIA kartico /PCD-RP-101CE - Ricoh RL5C475 II/ najde jo na irq
    5, in vanjo vtaknil še
- Roamabout 802.11b wireless kartico (eth1)

Vse skupaj deluje na Debianu - woody
- kernel 2.4.18-bf2.4
- pcmcia-modules-2.4.18-bf2.4
- pcmcia-cs    3.1.33-6

Ta konfiguracija deluje odlično če vtaknem namesto PCI kartice ISA kartico
(govorim o PCI to PCMCIA oziroma ISA to PCMCIA). Žal prodajalec nima več
ISA to PCMCIA kartic. Če pa je notri PCI kartica, mašina ob inicializaciji
PCMCIA kartice obnemi, oziroma obnemi ko pingam kake zunanje IPje, ki naj
bi šli preko te kartice. Šele ko PCMCIA izvlečem PC nadaljuje svoje delo
in se postavi pokonci. S to konfiguracijo mi je celo enkrat včeraj že
delala  - beri ni zmrznila. Danes pa zopet zmrzne. grrr.

Sumim da je problem v tej PCI to PCMCIA kartici, oziroma starem Biosu ki
tega ne zna atomatično hendlat. Vendar ne vem kje naj se tega lotim ker ne
vem kako se PCI zadeve obnašajo pod Linuxom. Mogoče je potrebno samo
dodati kako vrstico v /etc/default/pcmcia in bo čudežno pričela delovati.
:)


Spodaj podajam nekaj malega o mašini kar mi je koristilo pri dosedanjem
googlanju.. :)

Ker je PCMCIA kartica izvlečena se ne vodijo moduli orinoco,....
 
marjan at mujo:/proc$ cat modules 
ds                      6624   1
i82365                 22416   1
usb-uhci               20708   0 (unused)
usbcore                48032   1 [usb-uhci]
pcmcia_core            41408   0 [ds i82365]
3c509                   7968   1
isa-pnp                27432   0 [3c509]
keybdev                 1664   0 (unused)
input                   3072   0 [keybdev]

marjan at mujo:/proc$ cat interrupts 
           CPU0       
  0:    3043590          XT-PIC  timer
  1:        326          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:  219875488          XT-PIC  i82365
  8:          3          XT-PIC  rtc
 10:        807          XT-PIC  eth0
 11:          0          XT-PIC  usb-uhci
 14:     256744          XT-PIC  ide0
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0

marjan at mujo:/proc$ cat pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. VT82C595/97 [Apollo VP2/97] (rev
6).
      Master Capable.  Latency=8.  
  Bus  0, device   4, function  0:
    CardBus bridge: Ricoh Co Ltd RL5c475 (rev 128).
      IRQ 5.
      Master Capable.  Latency=64.  Min Gnt=128.Max Lat=7.
      Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
  Bus  0, device   7, function  0:
    ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP]
(rev 65).
  Bus  0, device   7, function  1:
    IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
      Master Capable.  Latency=66.  
      I/O at 0x1000 [0x100f].
  Bus  0, device   7, function  2:
    USB Controller: VIA Technologies, Inc. UHCI USB (rev 2).
      IRQ 11.
      Master Capable.  Latency=66.  
      I/O at 0x1020 [0x103f].
  Bus  0, device   7, function  3:
    Non-VGA unclassified device: VIA Technologies, Inc. VT82C586B ACPI
(rev 16).
  Bus  0, device  15, function  0:
    VGA compatible controller: S3 Inc. Trio 64V2/DX or /GX (rev 22).
      IRQ 11.
      Non-prefetchable 32 bit memory at 0x40000000 [0x43ffffff].


marjan at mujo:/etc/network$ less interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
        address 192.168.15.8
        netmask 255.255.255.0
        network 192.168.10.0
        broadcast 192.168.15.255
        gateway 19x.x.x.123
iface eth1 inet static
        address 19x.x.x.123
        netmask 255.255.255.240
        network 19x.x.x.112
        broadcast 19x.x.x.127
        gateway 19x.x.x.125
        wireless_essid W
        wireless_mode Managed
        wireless_enc s:geslo
        wireless_rate 11M
        wireless_nick "mujo"
        wireless_ap "00:E0:63:72:7A:3C"
        
        
           
marjan at mujo:/etc/default$ less pcmcia 
#
# This file was automatically generated during the Debian installation
#
PCMCIA='yes'
#
# Should be either i82365 or tcic
#
PCIC="i82365"
#
# Put socket driver timing parameters here.
#
PCIC_OPTS=""
#
# Put pcmcia_core options here.
#
CORE_OPTS=""
#
# Put cardmgr options here.
#
CARDMGR_OPTS=""